Machine Recycling Discussion and Moderated Newsgroup   >   Separate Parts   >   Mechanical Control Parts   >   West   >   Used   >   Osram quicktronic T8 dimmable ballast 1-10V HF2X18W-58W

Osram quicktronic T8 dimmable ballast 1-10V HF2X18W-58W


OSRAM Quicktronic T8 Dimmable Ballast 1-10V HF 2x18W-58W
* "Fluorescent lamps-ECG - T8 - 1...10V DIM"
* Line frequency: 0, 50 to 60 Hz
* Digitally controlled preheating
- Optimum preheating in any dimmer setting
- Cut-off above 80% luminous flux
* Control via the 1...10V interface
* Design/Version: ECG 1-10 V
* Standard: DIN VDE 0875/CISPR 15/EN 55015 / EN 61547 / IEC 61000-3-2/EN 61000-3-2
* Operating frequency : 40 kHz 2)
* TH full width at half maximum : 165 s
* Luminous flux : 2 x 1300lm
* Luminous flux : 2 x 3200lm
* Luminous flux : 2 x 5000lm
* Wire preparation length, output side 8.5..9.5mm
* Wire preparation length, input side 8..11mm
* Ambient temperature range : 0 ... +50 C
* Storage temperature : 0 ... 50 C
* Model: HF 2x18/230-240 DIM / HF 2x36/230-240 DIM / HF 2x58/230-240 DIM (Available for selection)
* Cater to Tube Watt: 2x18W , 2x30/36/38W or 2x58W (Available for selection)
Our Ref. G500/HD242/PM150/OP11



Osram quicktronic T8 dimmable ballast 1-10V HF2X18W-58W