Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Mechanical Control Parts
> West
> New
> used enshu 630H horizontal machining center hmc
used enshu 630H horizontal machining center hmc
This is an Enshu 630H horizontal machining center with the following :
Distance from table top to spindle : 1.96" - 33.46"
Distance from spindle nose to table : 7.9" - 37.4"
Maximum weight on table : 2,640 lbs.
Minimum index angle of table : 1 degree
Spindle speeds : 20 - 6,000 min ( RPM )
Spindle speed changes : 2 stages
Spindle nose taper : 7/24 taper No. 50
Spindle bearing diameter : 3.9"
Cutting feed rate : 0.04" - 196.9"/ min
Jog feed rate : (21 stages) 0 - 157.5"/min
Pallet exchange method : Parallel shuttle
Pallet exchange time : 15 seconds
Axis feed motors for X,Y,Z : 4.7 HP
Floor space occupied : 135.4" x 232.3"
Distance from table top to floor level : 43.3"
All of these specifications came straight from the manual
This machine is in the process of being cleaned and powered up
Email with any questions and I will get them answered quickly and to the best of my ability
We accept US cashier's checks as well as bank wire transfers and preapproved company checks.
