Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Mechanical Control Parts
> South
> Used
> 10" x 12"cc karstens universal cylindrical grinder '88
10" x 12"cc karstens universal cylindrical grinder '88
Preowned 10" x 12"cc KARSTENS Universal Cylindrical Grinder With Internal Grinding Attachment, Model: AS16/300 S/N 2380 (Factory Rebuilt By SWH Grinding Systems in 1988)
Grinding wheel diameter, up to
Headstock spindle speed, infinitely variable
Swivel range toward the grinding wheel
Swivel range toward the operator's side
One revolution of the infeed handwheel is equivelant
Handwheel is divided into increments of 0.00025" or
One graduation on the fine adjustment adjacent to
the infeed handwheel is equivalent to
Automatic feed rate, infinitely variable
Total feed screw travel of wheelhead
Table travel speed, infinitely variable, up to
Swivel table graduated to a maximum angle of
0.04" infeed (0.08" stock removal)
3 degree clockwise, 13 degrees
Infinitely variable rates for hydraulic table movements, table reverses instantaneously
or after and adjustable dwell at the right end or left end of stroke
Grinding wheel feed, with traverse grinding, selectable at each reversal or at table
reversal left or right only
Infinitely variable infeed impulses for plunge cut grinding
Hydraulically actuated rapid advance/retraction of grinding wheelhead
Swing-around internal grinding attachment with spindle (15,900 R.P.M.)
Universal motorized workhead with combination live and dead center and hand lever
draw bar with adapter for type 5C collets. Workhead has three modes of operation:
Work Rotation On/Work Rotation Off/Work Rotation On-Off in conjunction with
#211 ANILAM Wizard two-axis digital readout (.00005" resolution)
Self-contained hydraulic system
External coolant pump and tank
.75 H.P. 3/60/220-440 volt workhead motor
1.5 H.P. 3/60/220-440 volt hydraulic pump motor
2 H.P. 3/60/220-440 volt wheelhead motor
Machine is wire for 3/60/220 volt operation.
