Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Mechanical Control Parts
> Klein cementex 1000 volt insulated 33527 kit&case nice+
Klein cementex 1000 volt insulated 33527 kit&case nice+
THIS LISTING IS FOR A KLEIN & CEMENTEX INSULATED, 1000 VOLT, TOOL KIT.
INCLUDES THE TOOL CASE/CARRYING CASE, WHICH HAS SOME #'S ON THE FRONT (SEE LAST IMAGE).
I AM LISTING THIS KIT AS USED BECAUSE A COUPLE OF THE SCREWDRIVERS HAVE BEEN USED 2-3 TIMES.
I DON'T SAY THIS OFTEN BUT, THIS KIT REALLY IS "LIKE NEW". SEE FOR YOURSELF IN THE SUPER-SIZED IMAGES.
EACH SECTION OF TOOLS HAS IT'S OWN HOLDER/TOOL WRAP TO KEEP EVERYTHING NICE, NEAT, & ORGANIZED.
THE SOCKETS, RATCHET, & WRENCHES ARE CEMENTEX & ARE JUST AS GOOD AS KLEIN,
SINCE KLEIN DOESN'T MAKE SOCKETS & RATCHETS.
THIS IS AS GOOD AS IT GETS FOR ELECTRICIANS/TELECOM TOOLS!!
THIS KIT HAS 49 TOTAL TOOL PIECES AS FOLLOWS:
PLIERS/CUTTERS/STRIPPERS= 13 PIECES
3/8" DRIVE RATCHET/SOCKETS/EXTENSIONS= 11 PIECES
WHAT YOU SEE IS EXACTLY WHAT YOU'LL GET.
.Klein offers a quality line of Insulated Tools
The new line of insulated tools incorporates all the Klein quality design and construction features that professionals have relied on for over 137 years. The tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Klein Insulated Tool
All catalog numbers for Klein insulated tools have the suffix "-INS" and are marked with the official international 1000-volt rating symbol. Remember, not all tools with plastic coatings or plastic handles provide protection against electrical shock. Only use those tools that are marked with the official international 1000-volt rating symbol, as shown below, if there is any chance that the tool will make contact with an energized source.
3/8 In. Dr. Ratchets, Extensions and Socket Sets
Double Insulated 3/8 In. Dr. Ratchets, Extensions and Socket Sets
Each hand tool we manufacture is rated for exposure up to 1000VAC and dielectrically tested at 10,000VAC. These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools. These tools are necessary for compliance with OSHA 1910.333 (c)(2), and NFPA 70E 2004.
The insulating material used is impact resistant and flame retardant. Two-color insulation makes inspection easier which adds to the overall safety. If the yellow under layer is showing, the tool may no longer be insulated properly and should be considered for replacement and removed from service.
NE-Type side-cutting pliers with cutting knives
Diagonal-cutting pliers with cutting knives
Diagonal-cutting pliers with angled head, cutting knives
HD long-nose pliers with side cutters, skinning hole
HD diagonal-cutting pliers with tapered nose
Long-nose pliers with side cutters
Round-shank cabinet-tip screwdriver (3/16 x 4)
Round-shank cabinet-tip screwdriver (3/16 x 6)
Round-shank cabinet-tip screwdriver (3/16 x 8)
HD round-shank keystone-tip screwdriver (1/4 x 4)
HD round-shank keystone-tip screwdriver (5/16 x 6)
HD round-shank keystone-tip screwdriver (3/8 x 10)
Round-shank Phillips-tip screwdriver (No.1)
Round-shank Phillips-tip screwdriver (No.2)
Round-shank Phillips-tip screwdriver (No.3)
10" Pump pliers & 12" PUMP PLIERS
Lineman's plastic-handle skinning knife without handle ring
Custom-fitted, heavy-duty case
* Individually tested to exceed standards.
* Two layers of insulation for protection against electric shock.
* Cushion-grip handles for greater torque and comfort.
* Patented Tip-Ident quickly identifies nut driver and size.
* Full hollow shafts facilitate work on long bolt applications.
* Set includes 3/16", 1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2".
* Set includes 3/8", 7/16", 1/2", 9/16",5/8", 11/16", 3/4", 13/16"
ALWAYS GOOD STUFF SOOO... CLICK ON THE BLUE &Check out my other items!
