Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Mechanical Control Parts
> East
> Used
> Video converter - rgbhv rgbs rgb to vga (h freq >31KHZ)
Video converter - rgbhv rgbs rgb to vga (h freq >31KHZ)
RGBHV RGBS RGB to VGA Converter (Horizontal Scanning Frequency>31K) Note:
The X RGB BOX can be used to convert a variety of RGB signal types into VGA signals; you can drive external LCD TFT panels, CRT displays, projectors, LCD TV, rear projection and other equipment. It is easy to replace your existing display system, picture quality is good and the picture is clear with stable performance. A wide range of industrial control equipment (CNC machine tools, such as display, import DCS displays, plastic injection machines, analytical instruments, navigation, import production line dedicated displays, can be modified to work with new display types. It also has applications for medical equipment, airport & railway display systems, finance & special equipment displays, import games, bowling and other entertainment facilities, etc). 1. Characteristics of the automatic signal identification and synchronization circuitry, with automatic resolution identification. Supported signal sources:RGB SOG (green sync)
RGBHV (sync separation) Supported resolutions:
2. Interface Connections.Mark the corresponding interface features: (below)
DC12V: Power input, 9-12V DC voltage, use power supply with >1A rating.
VGA OUT: Signal output interface to VGA type display.
VIDEO IN 2: DB15 connector input signal.
VIDEO IN 1: 5BNC: input signal with VIDEO IN2.
K1: Switch button for sync signal reset, scan synchronous signal. 3. Installation Procedure The channel signal input connectors are located on the front panel comprising five BNC connectors, plus a pushbutton (K1).V: for the field synchronization signal.
H: for the line sync signal, or composite sync signal.
R: red signal, or synchronous signal red.
G: green signal, or synchronous signal green.
B: blue signal, or the blue sync signal.
Channel Interface Description, V HRGB K1 (panel screen)
When the signal source for the RGB (SOG green sync, SOR simultaneous red, SOB blue sync) tri-color signal then RGB BNC connectors are used in a one-to-one configuration.
When the signal source for the RGBS (CS composite sync) then the H / CS, R, G, B four BNC connectors are used in a one-to-one configuration.
When the signal source is RGBHV (sync separation) then V, H, R, G, B 5 BNC connectors are used in a one-to-one configuration.
On the rear panel there are two-channel signal input interfaces similar to VGA output. These are labelled VGA in, with the following pinout: See Manual for Details
4 CONNECTIONS 1. Connect the signal source to the input signal connector.
3. Connect the power supply and switch on - The system will automatically identify the input signals. If there is no auto-recognition then press the reset button (K1) on the front panel. 5. Technical DataPower: DV12V ,9-12 DC, recommends that more than 1A current.
Input video signal: Support (RsGB, RGsB, RGBs, RGBCS, RGBHV, VGA, etc.)
Resolutions: 640 * 480,800 * 768,1280 * 600,1024 * 1024,1600 * 1200, etc.
Resolution: 640 * 480,800 * 768,1280 * 600,1024 * 1024,1600 * 1200, etc.
