Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Knobs and Handles
> South
> New
> New multi-parameters pai\tient monitor-TYJ2000
New multi-parameters pai\tient monitor-TYJ2000
Product name JERRY-A NIBP Patient Monitor
Two Parameters NIBP, Pulse Rate.
3. Audio and visual alarm with freely set limit
6. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries
7. Automatic power-off without signal for 10 min.
8. Patient s trend can be transmitted to a personal computer for display saving and printing
9. Suitable for adult and pediatric
NIBP Patient Monitor can be applied in the hospital s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.
NBIP Patient Monitor main unit 1pc
Color: Light gray and dark gray
Measurement method: Oscillometric
Range Adult:30mmHg~255mmHg Pediatric: 30mmHg~160mmHg
Measurement unite: mmHg/kPa selectable
Measurement mode: Manual, Auto, STAT
Measurement Type: SYS, DIA, MAP
Measurement interval in AUTO mode:1,2,3,5,10,15,20,30,60,90Min
Over-pressure protection Adult:300mmHg Pediatric:220mmHg
Mode: Audio and visual alarm, the measurement and LED light flash, and the speaker sounds the alarm.
Setup: High and low alarm limits adjustable.
Type: 128 64 dot matrix homochromy LCD and LED
LED Light: Dual-color LED (red/green) and homochromy LED
Transportation and storage -20 C~60 C
Operation: 15%~95 %( non-condensing)
Transportation and storage: 10%~95% (non-condensing)
Transportation and storage 50kPa~106kPa
Input: AC 100 240V, 50/60Hz, 0.7A
Type: 1.5Ahr/8.4V Li rechargeable battery
Operating Time: 15 hours of stand-by time with a full battery.
This Machine have two type,you can have choose either!
