Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Knobs and Handles
> North
> Used
> New xlerator hand dryer xl-bw thermoset bmc cover
New xlerator hand dryer xl-bw thermoset bmc cover
Excel s research team has developed the
XLERATOR with patented technology that delivers
hand drying performance. Conventional hand dryers take from 30 to 45 seconds
to get a user s hands totally dry, and very few of us are willing to wait that long. With the automatic
XLERATOR, not only do your hands get dry in 10 to 15 seconds, but consumer
test participants report that their hands also felt
XLERATOR dry hands in one third of the time required by conventional hand
dryers, our hand-drying system is designed to run on 15-amp service (making it great for older
buildings). The combination of these two factors results in 80% less energy cost per use vs.
is the first hand dryer to achieve GreenSpec approval because it meets a number
o f GreenSpec standards; conserves energy, has low maintenance requirements and reduces waste.
XLERATOR hand dryer will result in more than a 95% savings vs. paper towel costs. In addition to paper towels, the
following costs are also eliminated: ordering, storing, replenishing, collecting and disposing of bacteria-laden paper towel waste.
After six years in the marketplace, the
XLERATOR hand dryer has received numerous awards and designations,
appeared in case study articles done by prestigious trade publications, and been featured on national television
XLERATOR is being specified in many
high-profile facilities and has become...
The XLERATOR hand dryer is endorsed by the GRA as the best environmental solution in the hand dryer category for the restaurant industry.
A. Cover shall be of the following:
White thermoset (BMC) Fiberglass re-enforced bulk molding compound.
All covers will be fastened to a wall plate by two chrome plated tamper-proof bolts.
B. Wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of
which shall be suitable for use with surface conduit, for ease of wiring.
C. All internal parts shall be coated according to Underwriters' Laboratories, Inc.
D. Entire mechanism shall be internally grounded.
A. Motor shall be a thermally protected, series commutated through-flow discharge
vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000
LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches
B. Heating element is constructed of Nichrome wire and mounted inside the blower
housing, thereby being vandal proof. It shall be protected by an automatic resetting
thermostat, which shall open whenever air flow is cut off and shall close when flow
of air is resumed. It shall produce an air temperature of up to 135 F (57 C) at a
72 F (22 C) ambient room temperature at the hands (4 inches [102 mm] below air
C. Control assembly is activated by an infrared optical sensor located next to
air outlet. The dryer shall operate as long as hands are under the air outlet.
There is a 35-second lockout feature if hands are not removed.
The dryer shall be guaranteed to be free from defects for a period of five (5) years.
Warranty shall include factory performed labor as well as the repair or exchange of
defective parts, at manufacturer's option.
One dryer for every two washbasins is sufficient for most applications. If restroom
traffic is unusually heavy, we suggest one dryer per washbasin in small installations
and two dryers for every three washbasins in larger installations. When a 54" washfountain
is used, we suggest four to five dryers
Dimensions: 11 3/4" lg. X 12 11/16" high x 6 11/16" deep
Weight: XL-BW - 13 lbs. (5.91 kgs.) XL-SB 14 lbs. (6.36 kgs.)
XL-W, XL-GR, XL-C - 16 lbs. (7.3 kgs.)
This dryer is 110/120 volts 12.5 Amp 60 Hz, contact me for these other voltages.
IT IS TIME TO THROW IN THE TOWEL!!!
Contact me for an unadvertised price list.
