Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Knobs and Handles
> North
> New
> Jai-pulnix rmc-4200GE ccd gige color camera 1.2" w/lens
Jai-pulnix rmc-4200GE ccd gige color camera 1.2" w/lens
JAI-Pulnix RMC-4200GE CCD GigE Color Camera 1.2" w/Lens
This is a Used RMC-4200GE Progressive Scan CCD Color Camera with Navitar 6000 2X F-Mount Zoom Lens Adapter 1-62922-0. This camera is the RoHs compliant version of the TMC-4200GE. The RMC-4200GE is a compact, very high-resolution (4.2 Megapixels) color progressive scan CCD camera with a dual-tap front-end, automatic channel balancing, GigE Vision digital output, and a frame rate of 15 fps at 2048 x 2048 resolution. The RMC-4200GE features the latest Kodak KAI-4021 CCD imager equipped with a Bayer color filter array (host-based interpolation required). It also provides 12-bit linear output, or can be set to generate 10-bit/8-bit images with a modifiable built-in look-up table. Other features include image center partial scanning (250, 500, or 1000 lines), user-definable variable partial scanning (any number of lines with any starting point), defective pixel compensation, and a PIV mode for advanced flow analysis.
This camera can interface with any GigE Vision compliant software and hardware. The JAI SDK is provided to allow users to control various camera functions including: Exposure control for free running, triggered, and pulse width control, Gain and black Level, Save settings, Load settings, LUT control to maximize dynamic range, Scan mode selection, and Pulse generators. The SDK provides functions for controlling image capture, as well as easy interfaces for setting camera functions and an API for .NET and C++ interfaces. CPU usage can be kept low via the JAI GigE Vision Filter Driver.The RMC-4200GE is supported by JAI's easy-to-use SDK and Control Tool software (Free Download), offering straightforward setup and full GigE Vision and GenICam compliance. The camera also integrates smoothly with a variety of third-party GigE Vision software libraries and development tools.
Cosmetically, the item is used but in flawless condition. It was part of a research and development project to be installed in a wafer robot. The machine was never put into use. They attached heat-sinks on the camera because at maximum speed, they ran a little warm. The heat sinks are removable. This item does not include manuals or software. The photos show a typical item. Only what is shown in the photos is included.
Please Note that this camera is compatible with 3rd Party accessories.
* 1.2 progressive scan IT CCD (Kodak KAI-4021)
* 2048 x 2048 resolution @ 15 fps dual-tap
* Software-selectable single-tap mode available @ 8 fps
* 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
* GigE Vision Ethernet output and analog output
* 100 m with standard CAT 5E or CAT 6 cable (Not Included)
* Image center partial scan (1000, 500, 250 lines)
* 2X2 binning and user-definable variable partial scan
* Full-frame shutter to 1/16,000 sec.
* Asynchronous reset, no-delay, pulse width control shutter
* Defective pixel compensation
* PIV (particle imaging velocimetry) mode
* Extensive software developer s kit (SDK)-Free Download from manufacturer's site
* Sensor 1.2 progressive scan interline transfer CCD
* Active area 15.15mm x 15.15mm
* Readout modes: A-2048 (H) x 2048 (V) @ 15 Hz, B-2048 (H) x 1000 (V) @ 28 Hz (partial scan), C-2048 (H) x 500 (V) @ 50 Hz (partial scan), D-2048 (H) x 250 (V) @ 80 Hz (partial scan), U-2048 (H) x 250 (V) @ 80 Hz (partial scan)
* Synchronization Internal/External auto switch
* HD/VD, 4.0 Vp-p impedance 4.7K
* VD=14.79 Hz 2%, non-interlace
* Sensitivity: Color-0.8 lux f=1.4 (no shutter) @ 15 fps,
* Pixel sensitivity: 31 V/e-
* Video output: Analog- 1.0 Vp-p, 75 ?/ Digital-Gigabit Ethernet (8-bit/10-bit/12-bit)
* Color (TMC/RMC-4200 only) Raw Bayer output for host-based interpolation
* Gamma Programmable LUT (Gamma 1.0 std)
* Shutter speed (programmable) 1/15 to 1/16,000 in increments of 32.5 s
* Lens mount C, F, M42 mount (use >1 format lenses)
* Power 12V DC 10%, 590 mA (typical at 25 C)
* Operating temperature -10 C to 50 C
* Vibration 7 Grms (10 Hz to 2000 Hz) Random
* Shock 70 G, 11 ms, half-sine
* Lens Model: Navitar 2X F-Mount-1-62922-0
* Lens Field of View with attachment: 36 MM (Nominal)
* Camera Dimensions (H x W x L) 51 mm x 51 mm x 85 mm
* Camera Weight 214 g (without lens)
