Machine Recycling Discussion and Moderated Newsgroup   >   Separate Parts   >   Electrical Parts   >   West   >   New   >   Vortex - dual cnc mixer - for eifs, stucco, aac, sips,

Vortex - dual cnc mixer - for eifs, stucco, aac, sips,


Used for mixing EIFS, Foam Cutting, AAC, SIPs, ICF, Stucco & other mixing requirements
The "One Touch" CNC Mixer. Set the Bucket in Place, Press One Button.
The Bucket Clamp Automatically Comes Down and Locks the Bucket in Place and the Paddle Starts Mixing. It can Reciprocate Up and Down and it Shuts Itself Off.
* 30 AMP 220 Volt AC Single Phase
* Requires Air Compressor Set at 80 PSI for vertical movement of motor carriage.
* Timer - adjustable from 999 Hundredths of a second to 999 Minutes
* Blades should be approximately 19" L. and up to 5/8" in Dia.
* Can mix single pail - Left motor is the default motor.
* Approximate weight - 500 lbs.
MIXER AVAILABLE IN SINGLE OR TRIPLE HEAD CONFIGURATION.
CAN BE SETUP WITH AUTOMATIC COLOR DISPENSING UNIT - ALSO AVAILABLE - CALL FOR INFO.



Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips, Vortex - dual cnc mixer - for eifs, stucco, aac, sips,