Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Electrical Parts
> West
> Hp agilent 6032A dc power supply, 0-60VDC, 0-50A, 1200W
Hp agilent 6032A dc power supply, 0-60VDC, 0-50A, 1200W
HP Agilent 6032A DC power supply, 0-60Vdc, 0-50A, 1200W
Unit Included: No documents or accessories come with the unit
The HP Agilent 6032A is a System DC Power Supply providing 0 to 60 volts from 0 to 50 amps, up to 1200 Watts output. The 6032A features GPIB programming via an IEEE-488 bus plus a serial link output permitting control of multiple units. Automatic switchover between constant current and constant voltage modes is standard.
In addition to current limiting, the 6032A has over voltage protection and foldback limiting features with annunciator LED's on the front panel advising the operator of operating modes, status, and errors.
The 6032A has easily viewable LED digital readouts of both voltage and current.
DISPLAY RESOLUTION - 10 AND 100 MV, 10 AND 100 MA
LINE REGULATION - VOLTS - 0.01% + 3 MV; CURRENT - 0.01% + 10 MA
LOAD REGULATION VOLTS - 0.01% + 5 MV; CURRENT - 0.01% + 10 MA
MAXIMUM CURRENT - 50 ADC Max
MAXIMUM VOLTAGE 60 VDC Max
MAXIMUM WATTAGE - 1200 W Max
NUMBER OF OUTPUTS Single Output
NUMBER OF RANGES - 3, AUTORANGING
OUTPUT CONNECTOR REAR PANEL BOLT
OUTPUT CURRENT - 50A, 30A, 17A; RANGES 1,2,3
OUTPUT POWER 1000W, 1200W, 1020W; RANGES 1,2,3
OUTPUT SENSING - LOCAL OR REMOTE
OUTPUT VOLTAGE 20V, 40V, 60V; RANGES 1, 2, & 3
PARD (RIPPLE AND NOISE) - 8 MV RMS OR 25 MA RMS; 20 HZ- 20 MHZ
PROGRAMMING METHOD IEEE-488, SERIAL, OR ANALOG
PROTECTION - OVP, CC, FOLDBACK CL
REGULATION DESIGN SWITCHING
