Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Electrical Parts
> South
> Used
> Schonstedt tracemaster pipe and cable locator
Schonstedt tracemaster pipe and cable locator
Schonstedt TraceMaster Single Frequency Pipe and Cable Locator
The TraceMaster was designed by industry leaders with recommendations from some of the biggest names in the industry. The receiver operates with only two buttons and two knobs with minimum training.
The TraceMaster offers you more productivity in the field with our exclusive RF link. Use this link to change frequencies and monitor battery usage from the receiver without having to return to the transmitter. This design saves battery life in the transmitter by not transmitting unnecessary frequencies.
Select between Passive, 575 Hz, 8 kHz, 82 kHz and 455 kHz operating frequencies. The selection is automatically communicated to the transmitter via the RF link. In the Passive mode the transmitter shuts down its output and the receiver searches for 50/60 Hz signals. The signal strength readout indicates the peak sensor signal at all operating frequencies. The left and right arrows, as well as the depth measurement are also available at all frequencies, with the exception of 455 kHz, which is based on a single peak sensor. Use the 575 Hz to trace good conductors for long distances without "bleeding" to adjacent utilities. The 8 kHz provides an ideal general-purpose frequency for medium to long distances in poorer conductors, with minimal bleeding. The 82 kHz is appropriate for shorter runs on pipes, especially if it is necessary to jump non-conductive gaskets. The 455 kHz will bleed easily to adjacent utilities, thus providing an excellent "sweep mode" for checking an area with unknown targets. There is no need to carry "additional instruments".
* 4 Active Features: Low, Medium, High and Extra High
* Remote control monitoring of the transmitter from the receiver via RF link
* Passive detection of 50/60 Mhz
* One Button Depth Measurement
* Digital Readout Display of Signal Strength
* LCD Displays, Left, Right and "on target" indications as well as transmitter and receiver battery status
* 60 Hours Operational Life (Intermittent)
* Lightweight Easy to Use Design reduces search time
* Modular Construction; High Performance Components
* State of the Art DSP (Digital Signal Processing) Technology
* Operating Voltage: 12V (8 AA Batteries)
* Battery Life: 60 Hours (Intermittent Use)
* Audio Output: 10 Hz-3000 Hz Determined by signal strength 0-70 db, Volume Controlled
* Operating Voltage: 12V (8 - D Cell Alkaline)
* Battery Life: 40 Hours (Intermittent Use)
* Operating Frequencies: 575 Hz, 8 Khz, 82 Khz, 455 Khz
* Operating Modes: Conductive, Optional Conductive Clamps, Inductive
8am-5pm Mountain Standard Time Mon-Fri
1-(***)-661-1129 or ****@butlersurvey.com
Seller will reserve the right to replace or repair the item if such action can be taken, if item does not meet return policy, a refund on the item will not be honoured.
Restocking fees of up to 25% of item sale price will be charged on returns unless alternate arrangements have been specified by seller
