Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Electrical Parts
> East
> New
> Sato CL412 thermal transfer label printers w/warranty
Sato CL412 thermal transfer label printers w/warranty
Sato CL412 Thermal Transfer Label Printers w/Warranty
This is a picture of three nice off lease Sato CL412 barcode printers. As far as I can tell these are 305DPI, but I am no expert and the specs are not guaranteed- I found that information online and lots of online info is wrong.
The manufacturers site is HERE. The manual for a very similar model is HERE.
The inside of one of these units, they are all very nice and clean. . No labels or ribbons are included, I put those in for testing.
The test label, I can't see any defects. The printhead looks good.
SATO CL-412 Thermal Transfer Printer - List Price $2,695
The CL-412 High Resolution Performance Plus Printer sets the new standard for value and performance in a high resolution industrial bar code printer. The CL-412+s rugged steel construction, its high speed 32 bit RISC Processor, high resolution print head and comfortable price combine to give users the superior quality and value expected from SATO PLUS top performance in any labeling application.
16 of the most popular bar code symbologies including the new 2-D codes, 12 proportional and mono-spaced text fonts and 10 scalable Vector fonts are built into the printer for great looking labels with minimal programming. PLUS TrueType fonts can be downloaded to the CL-412 to be used as internal fonts.
For virtually unlimited flexibility the CL-412 incorporates two PCMCIA expansion slots. By installing one or two PCMCIA cards, users can add up to 4Mb of additional memory to store formats, fonts, graphics such as logos or extend the print area. Users can develop an unlimited library of PCMCIA cards to meet to meet their needs.
The interface in the CL-412 is based on a new SATO design: Plug-in Interface Modules. Users select the interface type needed. Other printers in this price range typically offer only one choice; with the CL-412 you get multiple choices.
* High Resolution 300 DPI Print Quality
* High Performance 32-Bit RISC Processor
* High Throughput - 6" per Second
* Thermal Transfer / Direct Thermal
* 16 Bar Code Symbologies including 2D Codes
* 12 Proportional and Mono-Spaced Text Fonts and 10 Scalable Vector Fonts
* User Replaceable Printhead
* Options: 2 PCMCIA Expansion Slots, Label Cutter, Label Dispenser, Label Rewinder
Thermal Transfer/Direct Thermal
4.1" (104 mm) W x 14" (356 mm) L , 32.8" (833 mm) L with 2Mb PCMCIA memory card
UPC-A/E, EAN, Code 39, Code 93, Code 128, I 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Codabar, MSI, Bookland, POSTNET, UCC/EAN 128, PDF417, Maxicode, Data Matrix
2:1, 3:1, 5:2 or individually adjustable bar widths
12 proportional and mono-spaced fonts including OCR-A and OCR-B representations and an outline font. American and European characters, uppercase and lower case with descenders (code table 850).
Rotation of bar codes and text in four 90 steps; character expansion horizontally and vertically in 12 steps; RAM storage for special characters, dot-addressable graphics; sequential numbering. Form overlay for high speed editing of complex formats
SATO Hex/binary and PCX formats
Roll or fan-fold die cut labels, plain paper face stock, SATO standard or equivalent. Tag Stock, SATO standard or equivalent with punched feed slot for "see through" sensing or sense mark for reflective sensing.
Maximum caliper: 0.01" (0.25 mm)
Maximum roll diameter: 8.6" (218 mm)
Roll core diameter: 1.5" (38 mm) or 3" (76mm)
Adjustable position photo sensor for die cut labels and tags. Reflective sensor for use with preprinted sensing marks. Automatic, programmable setting of top of form.
Minimum: 0.87" (22 mm) W x 0.24" L (6 mm) L
Maximum: 5.15" (131 mm) W x 14" (356 mm) L. Up to 32.8" (833 mm) L with additional PCMCIA memory.
Up to 4.4" (111 mm) W x 1475' (450 m) L, wound Face-in
Centronics Parallel or RS-232C (2400 - 19,200 BPS, Ready/Busy and X-On/X-Off)
User programmable via data stream.
LED indicator: ON LINE (Green), ERROR (Red)
Configuration: 2x8 DIP Switches, 3 Controls
10.7" (271 mm) W x 16.9" (430 mm) D x 12.6" (321 mm) H
110V (+/-10%), 220V (+/-10%) 50/60 Hz (+/-1%)
Operating: 41 to 104 F (5 to 40 C), 15-85% RH, non-condensing
Storage: 0 to 104 F (-20 to 40 C), 90% RH maximum, non-condensing
On the back, a serial and an ext plug, whatever that is.
The label on the back with the model and configuration, I think. You probably know lots more than I do.
This is working fine, it carries a 5 day NON-DOA warranty. If it somehow doesn't work it can be returned. But this is beautiful and works great. Fast too.
PLEASE READ THIS SECTION ALL THE WAY TO THE BOTTOM.
* What you get is a nice price on a used or a hard to find item. What you don't get is a new item and extensive support.
* Please don't expect extensive support and handholding from us, after all we are remarketers. We're not authorized dealers on any of those and we're not experts on this particular item, at least in most cases.
* FOR MORE INFORMATION: Google is your friend. For more information about our items that's what we use, you should try that before asking us questions. Google almost always knows more than we do. You are ALWAYS expected to do your own research.
* WHAT'S INCLUDED: If you don't see a part, accessory, key, manual, cable, wire, cover, software disk, license or other item in the picture then that is not included. What you see is what you will get. Please do not expect any items to be included that are not shown in the picture. They're not included.
* Description and feature statements are often found on the internet and are often labeled as such "Information found on the Internet", and they might be entirely or partially incorrect like lots of internet information. You are ALWAYS expected to do your own research.
* On more valuable items we try to test more thoroughly when possible, but sometimes we can't test completely due to the complex technical nature of the item. Some items require special power, wiring, data lines or other elaborate stuff to test, we have a lot but we can't have everything.
* Please don't email us your best offer, you have to submit it through the best offer link to be considered.
* We do not pay for field service or repairs after you have received your item. We can't send a repairman to your location.
* Our pickup hours are 10AM-3:PM Monday thru Friday. Please don't come at 3:PM, make sure there is some time for you to pick up your item.
* We are remarketers. We are not authorized dealers for the items we sell and we're sure not experts.
* If you have questions about an item we prefer you email your request rather than phone. We respond to all our emails, if you don't get a response within 24 hours Monday through Friday resend it. We usually respond within a few hours to inquiries even on weekends when possible.
* Business Hours: 9:30-4:30 Monday-Thursday, 9:30-3:30 Friday, CLOSED WEEKENDS.
