Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Steam Powered
> West
> Used
> Tektronix P7313 12.5 ghz differential probe tekconnect
Tektronix P7313 12.5 ghz differential probe tekconnect
TEKTRONIX P7313 12.5 GHz DIFFERENTIAL PROBE
SN: (B010370), or (974507). See picture#4 Please
Operational: Lacked of equipment, untested
Tektronix has created a revolutionary Z-Active probe architecture that sets the industry benchmark for signal fidelity. Tektronix active probe architecture preserves high bandwidth while providing improved connectivity with low loading. The Z-Active architecture is a hybrid approach composed of a distributed attenuator topology feeding an active probe amplifier.
The Z-Active probes use a tiny passive probe tip element that is separate from the amplifier, extending the usable reach of the probe. In traditional active probes, adding this much length can introduce signal fidelity problems. However this architecture maintains high DC input resistance and presents a higher AC impedance than previous probe architectures. It accomplishes this while providing significant length between the probe body and the probe attachment point to the DUT. This architecture provides the best of both worlds: high DC impedance like existing active probes and the stable high frequency loading of Z0 probes.
You can be confident in the signal fidelity of your measurements because the Z-Active architecture provides:
Many of today s logic signals and serial bus signals require the capability to measure up to several volts peak to peak. These voltage levels may easily be viewed with the Z-Active architecture probes (P7380A, P7360A, and P7340A) with the extended linear dynamic range. With a 2.0Vp-p linear dynamic input range at the 5X attenuation setting, you can accurately measure DDR II & III, Firewire 1394b and PCI-Express I & II signals at reduced noise levels. In addition the 25X attenuation setting s linear dynamic input voltage range can be used up to 5.0V p-p for accessing even larger signal swings found during transition times.
The combination of the Z-Active architecture and the Tip-Clip assemblies provide superior signal fidelity at a cost effective price. The inexpensive Tip-Clip assemblies enable full performance solder connections at a very low price per connection. Over the life a probe this can add up to significant savings in the cost of operation.
* >12.5 GHz Bandwidth (P7313, typ.)
* >8.0 GHz Bandwidth (P7380A, typ.)
* >6.0 GHz Bandwidth (P7360A, typ.)
* >4.0 GHz Bandwidth (P7340A, typ.)
* DC Input Resistance: 100 k differential, 50 k single-ended
* AC loading: Zmin >200 out to 10 GHz
* Make differential or single-ended (ground referenced) measurements
* Solder down capability
* Handheld probing with variable spacing and compliance (>8 GHz)
* Interchangeable Tip-Clip assemblies
* Connect to a variety of devices, Economical
*UNIT MAY DIFFER SLIGHTLY FROM DESCRIPTION
