Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Steam Powered
> West
> Used
> 3AXIS nema 42 stepper motor 28N.m cnc router & mill
3AXIS nema 42 stepper motor 28N.m cnc router & mill
3 PCS Nema 42 Stepper Motor With 28N.m Holding Torque,
3 PCS Stepper Motor Driver Q2HB110M, 8.0A, 200 Microstep,
Holding torque: 280Kg-cm 3965oz-in
2, Stepper Motor Driver AC60V to AC110V,8A,200 Microstep
angle and constant torque stepper drive. The driven voltage range from AC60V to AC110V. it can match 2-phase hybrid stepper motors whose rated current is under 8A and shaft diameter range from
86mm to 130mm. It is widely used in numerical device such as curving machine, middle-sized numerical machine and packing machine.
Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 200
The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge
Bipolar constant current chopping circuit
Driven current is adjustable continuously from 0.5A/phase to 8A/phase
Single power supply, voltage arrange from AC60V to AC110V
Highest response frequency: 200Kpps
Overvoltage, overheat and overcurrent protection
