Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Steam Powered
> South
> Northwind MAC1811 commercial portable air conditioner
Northwind MAC1811 commercial portable air conditioner
NorthWind MAC1811 Tundra Series Air Cooled Commercial Portable Air Conditioner Features:
Constant Pressure Valve (for low temp)
Compressor Short Cycle Protection
Electrostatic Filters (better air quality)
(ACRS) pump and 5 Gallon tank equipped
Hi Lift Condensate Pump w/CV & Safety Switch
Electro-Mechanical Controls (readily available)
Condenser Fan Cycling controlled by load
2-Speed External Rotor Evaporator Blower
Evap Fan Constant/Cycle Switch
Expansion Valve (precise refrigerant control)
Rifled Copper Tube, Enhanced Fin Coils
High Pressure Switch Manual Reset
Refrigerant Service Access Ports
Green Power Ready indicator Light
Built-in Power Cord Storage Box
Auto Restart After Power Failure
Pitched, Stainless Steel Drain Pan
Gloss Powder Coat Finish (easy to maintain)
Heavy Duty 3 inch Casters (front swivel)
20 feet of 3/8 inch Drain Hose Included
Different applications require field installed accessories. Be sure to visit our accessories section for details:http:// /northwind-mac1811.html NorthWind Commercial Portable Air Conditioner Applications:
NorthWind units can be used as room air conditioners to cool a room or confined space. This application requires using a CAP (Condenser Air Plenum) and a CDF (Condenser Duct Flange) to duct condenser air into the unit and duct condenser hot air out of the unit. If this ducting is not used, the space temperature will increase.
NorthWind units may be used in open areas to cool specific "spots" through the evaporator grille, optional nozzles or duct adapter. Spot cooling can be an economical and convenient method to air condition where cooling the entire space is not practical, such as factory floors, warehouses, gyms, stadiums and similar large areas.
By using the optional EAP (Evaporator Air Plenum) and EDA (Evaporator Duct Adapter) it is possible to cool a space remotely. The Plenum and Duct Adapter permit ducting of the evaporator air. In drop ceiling applications the unit could be located in one room while ducting the supply and return air to another room. The "equivalent feet" guidelines must be observed.
When a unit is installed in an area that is not totally enclosed, the hot condenser air may be ducted out, allowing the evaporator air to cool the space. Consideration must always be given to the negative pressure created by the condenser air exhaust and its effect on space temperature.
NorthWind | MAC1811 Tundra Series Air Cooled Commercial Portable AC | 17,200 BTU/HR Cooling | 115 Volt 1 Phase 15.8 Amps
48"H x 19.75"W x 30"D (With Casters)
NorthWind MAC1811 Tundra Series Catalog
NorthWind MAC1811 Tundra Series Installation Manual
1 Year Parts And Labor / 5 Years Compressor And Electrostatic Filter
3-5 Business Days + Standard Ground Freight
If you have any questions, please EMAIL or call Toll Free: (***)-301-4660.
