Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Electrical
> South
> Lutron grafik eye 3-wire flourescent power module
Lutron grafik eye 3-wire flourescent power module
Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim fluorescent lights that have Lutron Hi-Lume and Eco-10 (Eco Series) line-voltage control electronic dimming ballasts.
Uses Softswitch arcless switching technology.
Up to 3 power modules may be wired on a single GRAFIK Eye zone.
Models available for 120 V control power.
Models available for 120 V or 120 - 277 V load power.
GRAFIK Eye 3000 Series control units
LP, LCP, and GP dimming panels
HomeWorks remote power panels
Load (output) power: Phase independent of control unit.
Operates Lutron Hi-Lume and Eco-10 (Eco Series) line-voltage control electronic
dimming ballasts with a smooth continuous Square Law dimming curve
Mount in 2-gang U.S. wallbox 3.5 in. (89mm) deep or 4 x 4 in. (102 mm) junction box 2.1 in. deep (53 mm). Indoors only.
This device generates heat; mount only where ambient temperature is 32-104 F (0-40 C).
Mount with arrows facing up to ensure adequate cooling.
Allow 4.5 in. (114 mm) above and below unit and between faceplates when mounting several in a vertical layout.
Mount so line (mains) voltage wiring is at least 6 ft. (1.8 m) from sound or electronic equipment and wiring.
Mount within 7 of true vertical.
6.3 in. width X 5.1 in. length X 1.6 in. depth
