Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Electrical
> North
> New
> X-prog-m (full- eeprom,EWS3,M35080,motorola 68HC05,68HC
X-prog-m (full- eeprom,EWS3,M35080,motorola 68HC05,68HC
X-PROG-M (FULL- Eeprom,EWS3,M35080,Motorola 68HC05,68HC08,68HC11,, etc)
Read Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 , HC912, MC9S12, MC9S12X , Texas Instruments TMS370 , MPC5xx, ST10Fxx, ATmega family MCU's and serial EEPROM's .
Motorola HC05 family authorization (allows to read/write EEPROM)
Motorola HC08 family authorization (allows to read/write EEPROM)
Motorola HC11 family authorization (allows to read/write EEPROM)
Motorola HC(S)12 family authorization (allows to read/write EEPROM and flash memory)
Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM).
Motorola HC05B/X family bypass security authorization (allows to read/write secured EEPROM and flash memory )
ST M35080 read/write/erase authorization
ATmega family authorization (allows to read/write EEPROM and flash memory)
Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read/write EEPROM )
National CR16 authorization (allows to read/write EEPROM memory)
ST10Fxxx family authorization (allows to read/write flash memory and external EEPROM)
MPC5xx authorization (depending on device program automatically detects
MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory. No need to desolder MCU) .
XPROG-m Rev. E functional features :
- Fully compatible with all software versions of " Device Programmer Desktop".
- Software update (ATMEGA) - directly from "Device Programmer Desktop".
- Software version control mechanism.
- Communication via USB 1.1 / 2.0 or high speed RS232 interface .
- Fully upward-compatible XPROG connector.
- Multi functional XPROG-m connector.
- 8 pin DIP socket for on- board programming.
- Supports many PLCC, QFP, LQFP adapters for on- board programming.
- High speed hardware engine (PLD).
- Two PWM regulated and ADC controlled voltage regulators.
Instructions to Use : Hardware Specifications :
Include high output current MPU.
External output for on-board device programming.
Serial port interface (up to 115K baud) works on (COM1, COM 2, COM3 or COM4).
If programmer connects to PC via RS-232 serial port, an external 12V DC power supply is needed.
If programmer connects to PC via USB port ,usually an external power supply is not needed, but be sure that USB can supply enough power.
- Processor: INTEL Pentium 60MHz or faster (depends on operating system)
- Memory (RAM): 32MB (depends on operating system)
- Communication: One free physical COM-port or USB 1.1 / 2.0
- Operating system: Microsoft Windows 95/ 98/ NT/ ME/ 2000/ XP
NOTE: USB is not supported on Windows NT 4.0 or early versions of Windows 98
Packing : Device programmer desktop 1pc
