Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Electrical
> North
> Dental lab wet model trimmer- 10" abrasive disc wheel
Dental lab wet model trimmer- 10" abrasive disc wheel
Dental Wet Model Trimmer 10" Wheel
Direct to you from the Factory !
* Equipped with a 10" fast-cutting abrasive disc
* Features advanced no-load breaks
* Water tube attachment included
* Sturdy, all-metal working platform
* Self-cleaning design eliminates plaster and stone build-up
* Dimensions: 14 x 14 x 17 (Height x Width x Depth)
* Power: 110 volt, 50-60 hz, 7A standard (220 volt, 50-60 hz, 3A available upon request)
* Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap; open the valve
* Connect the waste-disposal tube to the unit
* Connect the power cord, and switch on the power switch (O=off, l=on).
* When braking, it is normal to hear clicking before the sand tablet stops.
* If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
* To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).
* If you have any other questions, please contact us: ****@amdentalstore.com
* Our products are manufactured under the strict guidelines established by ISO 9001: 2000 Standards. This item comes with five (5) year full-coverage warranty.
* Please allow up to 10 business days for returns to be processed
