Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Diesel Powered
> South
> New
> Usb to 1.8~5V ttl serial uart (ttl) adapter
Usb to 1.8~5V ttl serial uart (ttl) adapter
USB to 1.8~5V TTL Serial UART (TTL) Adapter
This adapter's power supply can be configured to work with 3.3V~5V, and its communication interface can be configured to 1.8V~5V TTL signal level. Full hardware Handshaking is supported and the onboard FT232R chip allows communication rate up to 3MBaud at TTL/CMOS levels. The internal generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be used to drive a microcontroller or external logic.
Please visit my store at fcpcb.ecrater.com.
* USB to RS232/RS422/RS485 converters
* Cell phone and PDA USB data transfer with computer
* USB communication with your micro controller or project board
* Reading data from an external measurement instrument
* Suitable for incorporation into low/medium volume finished product designs
+1.8V to +5.25V supply for UART Interface CB1 CB2 pins
3.3V to 5.25V supply to the device core
Configurable CBUS I/O Pin, Default function is TXDEN (Enable transmit data for RS485)
Clear to Send Control Input / Handshake signal
Data Set Ready Control Input / Handshake signal
Configurable CBUS I/O Pin, Default function is RXLED# (Receive data LED drive)
Request To Send Control Output / Handshake signal
Data Terminal Ready Control Output / Handshake signal
