Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Diesel Powered
> North
> New
> AT6030D 3.02GHZ digital spectrum analyzer with big lcd
AT6030D 3.02GHZ digital spectrum analyzer with big lcd
AT6030D 3.02Ghz Digital Spectrum Analyzer with Big LCD
*** Brand New High performance Low cost spectrum ***
Frequency range 9 kHz to 3.02 GHz
Minimum frequency resolution of 100Hz
Span range of 100 Hz / div to 300 MHz / div 1,2,5 stage of choice
(Automatic), ZERO Span, FULL Span (9 kHz to 3.0 GHz)
Frequency Selection Start, Stop, Center, Span set
Span designated Span accuracy of 3% range
Read out accuracy Span accuracy + Frequency Standard Accuracy + RBW 50%
Phase noise -90 dBc / Hz (10 kHz to Off set date)
Range + 20 dBm ~ - 125 dBm (built: pre-amplifier)
The average noise level (1 kHz RBW, 10 Hz VBW state)
-100 dBm: 1 GHz ~ 2.4 GHz, 50 kHz ~ 150 kHz
Amplitude units in dBm, dBmV, dBuV, V, mV, uV, W, mW, uW
Frequency response (0 dB attenuation of the base) -3.5 ~ 1.5 dB (100 kHz ~ 10 MHz)
Reference level (Level) measurement range: -90 dBm to + 20 dBm
2nd harmonic distortion -60 dBc, -40 dBm input
Intermodulation Distortion -70 dBc, -40 dBm input
Remaining parasitic -85 dBm (input terminated 0 dB attenuation)
Other input parasitic -60 dBc, -30 dBm input
Resolution bandwidth of 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz,
300 kHz, 1 MHz, 3 MHz / 9 kHz, 120 kHz
Select degree of 60 dB / 3 dB ratio <15: 1
60 dB / 6 dB ratio <12: 1 (9 kHz, 120 kHz)
Choice of error 1.0 dB (1 kHz Reference RBW)
Video bandwidth 10 Hz to 3 MHz in 1-3-10 steps
Trigger Source Trigger source External (rear), Video, Freerun, Line
Trigger Mode Trigger Mode continuous, single
Trigger Level Trigger Level TTL level
Settings are stored up to 3000
Screen Type 6.4 "Color TFT LCD screen
Display Resolution 640 (H) x 480 (V) the actual display area
Marker peak search mode, Delta marks, center marks,
Tag tag tracking reference (SPAN scope) (up to 8)
RF Input Connector N Type Female, 50 nominal
VSWR 150 kHz to 3.0 GHz, VSWR <1.5: 1
(0 dBm Reference Level to date)
Maximum input level 0 Vdc, +20 dBm
Standard frequency (10MHz, Ref):
Temperature stability of 0.5 ppm
Output level 10 MHz, +8 dBm nominal nominal value
USB interface to support 1.1, 2.0, image file to support the GIF format
Support of the state of preservation, support for track preservation
Dimensions 375 (L) x 350 (W) x 195 (H) mm
Warm-up time for the accurate determination of continuing to carry out more than 20 minutes
Power 100-240 VAC at 50 / 60Hz
Power consumption 80 watts maximum (there is no built-in option)
Operating Temperature 0 to 40
Storage temperature - 20 to 70
Tracking Generator (100KHz ~ 3GHz)
CDMA signal generator option
Instruments GPIB interface table (IEE 488 USB)
Ethernet remote control interface corresponds to the Internet
Socket equipment return loss bridge
