Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Incomplete Machines
> West
> Used
> New chainsaw log chain saw lumber mill attachment
New chainsaw log chain saw lumber mill attachment
NEW CHAINSAW LOG CHAIN SAW LUMBER MILL ATTACHMENT
With this chainsaw attachment you have unlimited choices of species and size of boards for your projects. The days of picking through crooked, inferior boards at the lumberyard will be over. And no more sticker shock at the cash register over a pile of 2x4s. Backyard lumber making will save the woodworker hundreds of dollars and allow his creativity to soar.
Quickly attaches to any chain saw bar. "Safety Bite" clamp holds the unit securely onto the chainsaw bar. An ordinary 2" x 4" is then nailed to the log which provides the path for the guide. The unique "dog teeth" work with a rolling action to walk the chain saw easily down the log. Repeat the process on four sides & you have a square beam. Other cuts are just as easy. Eliminates "chainsaw fatigue" The Lumber Marker's exclusive dog-tooth pivoting action takes most of the strain out of sawing because it supports the weight of the saw and provides a smooth, leveraged swing motion. You can square one side of a 12-foot beam in about 5 minutes.
To use it, just set your chainsaw bar in its special clamp and tighten two sets of screws, no bar drilling then nail a 2 x 4 on a log. Position the saw and mill on the 2 x 4, and cut away. The Lumber Marker slides along the 2x4 guide making a straight first cut. Roll the log 90 degrees before making the next cut. After the fourth cut you have a beam. Go from there and cut yourwood to the size you want. You will need to reposition the guide board for each cut.
Just like the name brands, without the namebrand price.
