Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Incomplete Machines
> South
> New
> Gradall 534C-9 9K telescopic reach forklift telehandler
Gradall 534C-9 9K telescopic reach forklift telehandler
Gradall 534C-9 9K Telescopic Reach Forklift Telehandler
***Item Located in Rialto CA***
This machine features 4WD rough terrain operation, auxiliary hydraulics, hydrostatic drive, rear pivot steer and hydraulic chassis leveling.
Hours: 7,538 showing on functional meter
Operating Capacity: 9,000 lbs.
Operating weight: approx. 23,150 lbs
Dimensions: 288 L x 99 W x 92 H
Selectable 4 x 4 operation for rough terrain
Chassis / frame leveling or tilt
* For information and sizing on available attachments, see: http:// /telehandlers/pdfs/jlg4118_GradallTeleBro.pdf
Good no major damage noted. See photos below.
Engine runs with some smoking, hydraulics are operational. See video above.
Engine powered all functions. See Video
Powertrain was operational and hydrostatic drive worked normally in forward and reverse. 4x4 drive switch was functional.
Good Chassis is in good shape with no major damage. See photos.
Good Some scratches - see photos
Average with normal wear. Some boom shimmy when retracting from full extension without a load - see video.
Tilt-linkage Pins and Bushings
Front: 13/32 ; 20/32 ; Rear: 3/32 - See photos. RR has gouge in rubber of front sidewall.
Overall the chassis was in average shape with wear consistent with age, hours and average use.
Average some rear lines are chaffed.
Hydraulics were operational. Unit performed normally through a test of all functions.
Steering / powertrain controls
Functional but hard to read due to faded cover
Average left fork is bent slightly
Fork bar is bent and lefts side is missing brace bar.
* This item is located in Rialto, CA - 92376
* Preview and Pickup Address: 360 S Lilac Ave, Rialto, CA 92376
