Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Incomplete Machines
> South
> New
> Agilent 83496B el. clock recovery module, opt 100 & 200
Agilent 83496B el. clock recovery module, opt 100 & 200
Agilent 83496B Electrical clock recovery module, Electrical Inputs, 50 Mb/s - 13.5 Gb/s, with Phase Noise Analysis capability
Updated firmware and software
Full production calibration (with actual test data)
Same standard accessories and manuals as new units
Same warranty as new products
For more information, see all CertiPrime Features and Benefits in our store.
Option 100 - Electrical Inputs, 50 Mb/s - 7.1 Gb/s
The 83496B Clock Recovery Module with Phase Noise Analysis provides increased eye-mask and jitter measurement accuracy with breakthrough performance in clock recovery circuitry. It provides ideal performance for waveform analysis with the 86100C Digital Communications Analyzer and can derive a clock from signals with rates as low as 50 Mb/s-14.2 GB/s*, and any rate in between. At under 300 femtoseconds rms, the residual jitter of the output clock is virtually negligible, allowing accurate measurements of very low levels of signal jitter. Jitter spectrum and phase noise analysis on clock and data signals is available through a downloadable external application /find/jtf. *Requires 86100C DCA-J Firmware Revision A.08.10 or later
Option 200 (Extend maximum rate from 7.1 Gb/s to 13.5 Gb/s ) is included!
For more information, see the Data Sheet.
* Compatible with 86100A/B/C Infiniium DCA/DCA-J Mainframes
* Inputs: single-ended or differential, 3.5 mm (m) connectors
* Outputs: single-ended or differential, 3.5 mm (m) connectors
* Minimum electrical input level: 75 mVpp
* Ultra low residual jitter: < 300 fs rms (characteristic at 10 Gb/s)
* High gain for tracking spread-spectrum signals
* Phase noise analysis of clock or data signals
-> Option 300 (Adjustable Loop Bandwidth from 15 KHz to 10 MHz for Golden PLL operation) - might be available at extra cost (~$3,000)
* All accessories and manuals are included
* A new calibration certificate with detailed calibration data is included
* There is a 7 day right of return
* We offer a 6 month Agilent warranty
