Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Incomplete Machines
> East
> International fiber systems point-to-point
International fiber systems point-to-point
You are looking at an open box but never used:
International Fiber D1030WDMB RS-232/422 Point-to-Point Data Transceivers, SM, 1 FIBER, "B" END
The IFS D1030WDMB is a data transceivers provide point-topoint transmission of simplex or duplex EIA RS232/RS-422 data signals over one or two optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. The transceivers are also compatible with the IFS D1030WDMB is a adrop and repeat data transceivers when used as line terminating devices. Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive data status indicating LED s for monitoring proper system operation. The modules are available in either stand-alone or rack mount versions.
Features * Meets EIA RS-232/422 Specifications (Simplex or Duplex)
* Transparent to Data Encoding / Compatible with Major Data Protocols
* Data Rates up to 1.5 Mbps
* No In-field Electrical or Optical Adjustments Required
* Power, Transmit and Receive Data Status LED Indicators
* Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
* Integrated WDM for Greater Product Reliability
* Automatic Resettable Solid-State Current Limiters
* Hot-Swappable Rack Modules
* Distances up to 37 Miles (60 km)
* Comprehensive Lifetime Warranty
* Data Interface: RS-232 (data lines only), or RS-422 (see note)
* Data Rate: DC - 1.5 Mbps (NRZ)
* Operating Mode: Asynchronous Simplex or Full-Duplex
* Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
* D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
* D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
* Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
* D1030: 2 D1030WDMA: 1 D1030WDMB: 1
* Data and Power: Terminal Block with Screw Clamps
* Surface Mount: 12 VDC @ 150 mA
* Current Protection: Automatic Resettable Solid-State Current Limiters
* Circuit Board: Meets IPC Standard
* Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
* Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
* Operating Temp: -40 C to +74 C
* Storage Temp: -40 C to +85 C
* Relative Humidity: 0% to 95% (non-condensing)
