Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> West
> 50" tbl 5HP spdl willis 1250-ii vertical mill, 12" x 50
50" tbl 5HP spdl willis 1250-ii vertical mill, 12" x 50
50" Tbl 5HP Spdl Willis 1250-II VERTICAL MILL, 12" x 50
50" Table 5HP Spindle Willis 1250-II VERTICAL MILL, 12" x 50" Table, 5 HP, #40 Taper
All mills are standard with Meehanite castings, hardened and ground
table surfaces, hardened and ground ways with Turcite, class 7
precision spindle bearings, chrome plated ground quill, metered
valve lubrication systems, dynamically blanced VS pulleys, double
nuts on leadscrews for minimal backlash, double locks on all axes,
rubber way covers, and toolbox with tools and operator's manual.
Machines are wired for 220v operation.
Travels - longitudinal/cross (manual): 32" x 17"
Spindle speeds (variable): 60 - 4200
Quill power feed rates (inches per revolution): 0.00032", 0.0017", 0.0053"
Head tilting left to right (degrees): 45-0-45
Head Tilt front to back (degrees): Fixed
Spindle nose to table (min/max): 2 - 20"
Center of spindle to column face (min/max): 6 - 28"
Ground way surface width: 4-1/8"
Max work piece weight: 1100 lbs.
Machine dimensions: 68 x 65 x 92
- Servo feeds for X, Y and Z (knee)
- Align (imported) feeds for X, Y and Z (knee)
- Newall C80 DRO 2 or 3 Axis (Sony & Acu-Rite also available)
- Work Light ( regular or halogen)
- Right Angle Milling Attachment (R8 or #40 Taper)
- Boring head, B-type (for R8 spindles only)
