Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> North
> Used
> Greenlee digital multimeter dm-40 leads probes nip temp
Greenlee digital multimeter dm-40 leads probes nip temp
Greenlee Digital Multimeter DM-40 Leads Probes NIP Temp
Greenlee DM-40 600 v, CAT III, 7 function Digital Multimeter
* Use to measure amperage, voltage, resistance, continuity, diode, temperature, check batteries
* Multi-purpose meter for most electrical needs
* Includes rubber boot to protect meter from damage, test leads, type K thermocouple, and (1) 9 volt battery
* AC/DC voltage, DC amperage measurements
* Temperature measurement (includes Type K Thermocouple 392 deg F (250 deg C) Maximum
* Audible continuity and diode tests
* Easy viewing, backlit display
* Test 1.5 V and 9 V batteries
* AC Voltage measurement: 200.0, 600 V
* DC Voltage measurement: 200.0, 2000 mV; 20, 200, 600 V
* Amperage measurement: DC: 20.00, 200.0 mA
* Resistance measurement: 200.0, 2000 ohm, 20.00, 200.0 k Ohm, 20.00 M Ohms
* Temperature measurement: -40 to 1832 deg F (-40 to 1000 deg C)
* Measurement Category: CAT III, 300 V; CAT II, 600 V
* Continuity and diode test: Audible
This meter is UL tested for CAT I, CAT II, and CAT III applications. Category III is the distribution level, fixed primary feeders or branch circuits. These circuits are usually seperated from category IV (whether utility service or other high voltage source) by a minimum of one level of transformer isolation. May also be used in category I and category II areas.
