Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> North
> Used
> Cutler hammer heavy duty auxiliary power safety switch
Cutler hammer heavy duty auxiliary power safety switch
Cutler Hammer Heavy Duty Auxiliary Power Safety Switch
Specs: 30 Amp, 480 Volt 3 Pole
Dimensions: 23 inches tall x 23 inches wide x 11 deep
Industry-leading value creation is the driving force behind Eatons new Cutler-Hammer Auxiliary Power Heavy-Duty Safety Switch. This new switch gives the contractor an alternative to running a separate 120 volt circuit to the rooftop or other locations where a receptacle outlet is required. NECT Section 210.63 for Heating, Air-Conditioning and Refrigeration Equipment requires a 125 volt, singlephase, 15- or 20-ampere-rated receptacle outlet be installed at an accessible location for the servicing of heating, airconditioning and refrigeration equipment. The receptacle must be located on the same level and within 25 ft. (7.5 m) of the heating, air-conditioning and refrigeration equipment. The receptacle outlet is not to be connected to the load side of the equipment disconnecting means. This code requirement presents some challenges to the contractor especially for rooftop air-conditioning (RTU) installations. The contractor is forced to run a separate 120 volt circuit to the roof. The length of this run can vary greatly at each installation and can create several hours of labor for the contractor in addition to the increasingly costly materials required for the 120 volt circuit. Eaton has developed a new value-based solution for this application that eliminates the need for the contractor to run the separate 120 volt circuit to the rooftop. The Auxiliary Power Heavy-Duty Safety Switch combines a safety switch, control transformer and GFI (ground fault interrupter) receptacle in a single product for rooftop installation. The main switch compartment is on the right side of the assembly, while the auxiliary circuit containing the control transformer and receptacle is located on the left side. The auxiliary circuit is tapped off of the line side of the safety switch and can be operated independently of the main switch circuit.
* 30-100 ampere main switch ratings.
* 208, 240, 480 and 600 volt auxiliary circuit primary voltages.
* 2 kVA control transformer for thermal margins required for rooftop installations and stepping down to 120 volts.
* Secondary fusing for control transformer (time-delay to handle high inrush currents).
* Externally accessible 15- ampere commercial-grade GFI receptacle.
* In-use weatherproof receptacle cover.
* gasketed NEMAT 3R outdoor enclosure.
* 100 kAIC at 208 and 240 volts.
* 200 kAIC at 480 and 600 volts.
* ULT listed File No. E5239.
* Suitable for service equipment use.
* Removable auxiliary circuit cover.
* Suitable for unistrut or wall mounting.
* Field or factory-installed accessories.
List Price for new is $2700.00 Get this now for a fraction of that cost.
For more information please visit Eaton's web site by clicking here!
Surplus item: New switch in original box. This is a new switch that has never been used or mounted. It has been on the shelf for a while and needs to be sold.
Visit us on the Web:
Please feel free to contact me via email or at the phone numbers listed above.
I do my best to try to describe the item. If you require additional information, pictures, drawings, ect...please contact me and i will get back to you as soon as i can.
In order to do this i will need the carrier name, phone number, and your account number with the trucking company. I will also need a contact name and telephone number at your business in case the truck driver has any problems.
I do not refund freight charges for missed deliverys. You can specify a date for delivery as well if you wish.
Please make checks payable to Spina Electric Company.
Got Questions??? Please do not hesitate to call or contact me. I do not mind at all!
Spina Electric is a Quality Certified Company
