Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> North
> Used
> #81A11PC marvel 18"X20" universal vertical band saw '97
#81A11PC marvel 18"X20" universal vertical band saw '97
Preowned 18" x 20" MARVEL Universal Vertical Band Saw, Model: 81A11PC, S/N: E-483311PC (New 1997)
Capacity (Rectangles): nominal
blade at 45 degree angle (left)
blade at 45 degree angle (right)
blade at 45 degree angle (left)
blade at 45 degree angle (right)
Infinitely variable blade speeds
Feed pressure range, infinitely variable
Maximum shuttle table load capacity
10' Automatic indexing shuttle bar feed table with (2) hydraulically controlled vises
Marvel PC II micro processor control unit with dual alpa numeric display and operator
key pad for 1) setting cut off lengths up to 24" per single index or longer using Mult-
Cycle feature, and 2) presetting number of pieces to be cut. Memory feature permits
storing preset cut-off and number of pieces for up to 99 jobs.
Multi-Cycle feature: permits the operator to set the machine for automatic cut-off of
lengths longer than the shuttle travel of 24"
Cycle Selector Switch: controls either single cut or full auto cycle mode of operation
Hydraulically actuated tilt frame (programmable through PC II control)
Hydraulically actuated machine vise
Hydraulic holddowns (nesting clamps) on shuttle side of saw for vertical clamping
of structural shapes or multiple bar work (18"/9.5" horizontal/vertical capacity)
Hydraulically operated, manually controlled work lift rollers on left and right hand side
of machine bed to facilitate the passage of material over the surface of the work table
Motorized or manually operated chip conveyor
10 H.P. 3/60/230-460 volt hydraulically actuated blade drive motor and electrical controls
Machine is wired for 230 volt operation.
Approximate Floor Space Required:
