Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> North
> Unique model 250-mc door machine
Unique model 250-mc door machine
Unique Model 250-MC Door Machine
Machine to manufacture raised panel cabinet doors with (1) operator in approx. two minutes
5 HP , 3 Ph, 240V, 60 Hz Motor
Stacked Spindle: 1-1/4" dia x 5-1/4" long
A selector switch on the control panel raises or lowers the spindle pneumatically to the cutter required
Sliding table with pneumatic hold down bar has 2 way linear movement X and Y to be able to follow templates for producing straight or cathedral arch doors up to 50" long
1" diameter spindle for panels and stiles, a selector switch on the control panel raises or lowers the spindle pneumatically to the cutter required
(1) 3HP motor 3PH,208/230/460 volt
1" diameter spindle for profiling the ends of the rails; sliding table with pneumatic holddown bar has 2-way linear movement (x,y) to be able to follow templates for producing straight or cathedral arch doors up to 34" long
