Machine Recycling Discussion and Moderated Newsgroup   >   Full Machines   >   Complete Machines   >   Woodwworking   >   North   >   Flex core drill BED55 3 speed wet BSW1513VR w bit 120V

Flex core drill BED55 3 speed wet BSW1513VR w bit 120V


* Flex 3 speed wet core drill unit.
* drill model bsw1513vr (120 volt)
* comes with one cutter bit installed.
* This system costs over $1700 new with out the bit.
* The drill motor alone costs $1000 new.
* Unit is in excellent condition.
* Versatile wet core drilling unit for confined areas
* Mechanical 3-speed gearing
* VR full-wave electronic control
* Handles bit diameters of 1/2" to 3"
* GFCI circuit breaker in cord for operator protection
The FLEX BED55 Wet Core Drilling Unit is a slim, stable drill stand. The lateral supports and long feed column enable drilling of the next higher step from a lower one. The swiveling action of the feed column enables drilling in corners and recesses on banisters, gravestones and baths. Drilling speed can be adapted to any bit diameter (1/2" to 3")due to mechanical 3-speed gearing and VR full-wave electronic control. Speed ranges under load of 350 - 1000, 800 - 2300, and 1600 - 4600 RPM. Stand occupies 5" x 16" surface area. Includes water collector, GFCI operator protection circuit breaker in cord, 32 mm open-end wrench. 10 amp, 31 lbs.



Flex core drill BED55 3 speed wet BSW1513VR w bit 120V Flex core drill BED55 3 speed wet BSW1513VR w bit 120V Flex core drill BED55 3 speed wet BSW1513VR w bit 120V Flex core drill BED55 3 speed wet BSW1513VR w bit 120V Flex core drill BED55 3 speed wet BSW1513VR w bit 120V