Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> North
> Dual slide gate operator deimoskit
Dual slide gate operator deimoskit
You are purchasing 1 NEW BFT Deimos BT Dual Residential Slide Gate Operator Kit with 1 Additional BFT Mitto 02 Remote and 10 Nylon Rack Pieces ROA6
BFT Deimos BT Dual Residential Slide Gate Operator Kit
This Package includes the BFT Deimos BT Dual Residential Slide Gate Operator Kit and 1 Additional BFT Mitto 02 Remote and 10 Nylon Rack Pieces ROA6
1- BFT Deimos BT Dual Residential Slide Gate Operator Kit For Applications And Gates Up To 1100 LBS. & 75 ft. in length. per gate. This Kit Includes 2 Operators, 2 Control Boards, 2 Receivers, 2 Transmitters (2 CH.), 4 Photocells.
1- Additional BFT Mitto 02 Remote Control Transmitter
10- Nylon Rack With Metal Insert - ROA6
You Can Also Add A Optional Battery Back-Up!
* Operator size: (11"H x 10" W x 7" D) with incorporated control board & built in receiver
* In case of power supply failure, operation is guaranteed by a back up battery unit (SB BAT) inside the motor casing (sold separately)
Single-phase power supply 120 V 10%, 60Hz
Max. leaf weight 1,100 lb (500 Kg)
Leaf Speed 40 ft/min (12m/min)
Impact reaction electronic torque limiter
Manual release mechanical release with knob
Type of limit switch electromechanical or inductive
Environmental conditions from 5 F to 140 F (-15 to +60 C)
The Italian manufactured BFT brand of residential sliding gate automations are available ex stock with more than 10 models to suit all sizes and weights of residential gates. Easy to install.
Easy access to internal components during installation and maintenance. Optional battery back-up. QSC - Control panel includes the receiver and has the following functions: 2 or 4 step functioning logic, pedestrian access, 2nd radio channel, photocell cut-out on opening, impulse block opening, automatic closing time, separate adjustment of drive torque limiter during opening and closing phases, operation time adjusted by timer.
The Deimos can be used with a chain link fence when tight controls are held.
* The gate needs to be made with horizontal and vertical support other than the main frame. This will keep the gate from twisting and will keep the rack and the pinion in close tolerance.
* Use of a v track on the ground is also recommended this will keep the gate moving in a straight direction.
* The environment for rack and pinion needs to be smooth and level
DIMENSIONS OF DEIMOS KIT BOX: 16" LENGTH x 10" WIDE X 13" HIGH
DIMENSIONS OF DEIMOS ACTUATOR: 9.80" LONG x 10.43" HIGH x 6.30" WIDE
BFT Mitto 02 2 Two Button Remote Control Transmitter
BFT Mitto-02 2 button remote control. Supplied with programming instructions to program the remote control to your BFT garage, gate or shutter system.
Nylon Rack With Metal Insert - ROA6
ROA6 NYLON Rack With Metal Insert. 3.3FT
