Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> East
> New
> Modular package heat & ac unit make up air unit 2500CFM
Modular package heat & ac unit make up air unit 2500CFM
Modular Package Heat & AC Unit Make Up Air Unit 2500cfm
V1D.250-G10 Direct Gas Fired Heated Make Up Air Unit with 10" BlowerSupply Fan handles 2500 CFM @ 0.250" wc. Fan runs at 1305 RPM.Heater supplies 146850 BTUs. [Fuel: Natural Gas]Supply Motor: 2.000 HP, 3 Phase 208 V, 6.0 FLA, ODP (Open Drip Proof)Down Discharge - Air Flow Right -> Left3 Ton, Single Circuit Modular Packaged Cooling Option for Size 1 Modular Packaged Unit. Includes Condenser, DX Coil, Filter/Dryer Kit, Hard Start Kit, Thermal Expansion Valve, R410A Refrigerant, and Refrigerant Piping. (1,100 to 1,800 cfm) NOT BUILT WITH OPPOSITE SIDE CONTROLS OR OPPOSITE AIRFLOW DIRECTION. CONDENSERS REQUIRE SEPERATE 208V, 1 PHASE POWER SUPPLY.Includes: Intake Hood, Roof Curb, Gas Manifold, ETC The Modular Packaged Unit (MPU) is designed to be a factory packaged air conditioning and heating unit for 100% Outdoor Air (OA) applications. Units are sized to operate between 360 to 600 cfm/ton of cooling, depending on climate.
The modular packaged cooling unit is optimized to work in conjunction with highly efficient make-up air delivery methods, such as perimeter supply plenums. The unit can either have a down or end discharge, and can be used with both electric and gas heat. All refrigerant is environmentally friendly R-410A and condensers have a minimum SEER rating of 13 for greater efficiency.
One benefit of this unit is the multiple cooling stages. Multiple cooling stages increase the efficiency by not using 100% of the cooling capacity when this is not needed, thus allowing lower energy usage. An internal make-up air cooling thermostat automatically energizes the first stage when cooling of the make-up air is required. The same thermostat has a built in adjustable differential to energize the second stage of cooling when required.
The condensers are top mounted on the make-up air unit to minimize roof space requirements, and are situated for optimal airflow and serviceability.All products are ETL tested and listed in their appropriate category. Detailed submittal drawings are available to help ensure the system you purchase works best for your application. We are happy to assist you with your local contractors and inspectors to ensure your project is executed smoothly.
