Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> East
> Howard air-operated hot stamp machine
Howard air-operated hot stamp machine
Howard Air-Operated Hot Stamp Machine
Thermostatic Heat Control with Solid-State Dwell Timer, 4-Digit Reset Counter,
Built-In Speed Controls, Air Pressure Gauge and Regulator, Air Filter, Handle,
Fast Heating Adjustable Thermostatic Heat Controls, Foil Feed Adjustment, Self-
Centering Type Holder, Print Area 1.5 x 3.5, Use Electric Foot Pedal or Adjust to Use
Manually With Handle, Compressor Not Included (Need 2 CFM at 100 PSI)
(1) TS-93 Self Centering Type Holder
(1) Standard Work Table, Gauge Bars, Napkin Holder
(1) 18 Roll Foil Rack with 18 Rolls of Assorted 3.5 Foil
(1) Copy Howard Reference Manual
(2) Extra Slotted Disc Foil Guides
This used Howard Series 80 Foil Stamper has been cleaned and reconditioned.
New seal kits were installed in the air cylinder.
The three lights on the control box, Main Power, Heater & Foot Switch, vary in intensity
but are in good working order.
You will need a 2 CFM at 100 PS Compressor for air-operation.
Print quality is good as shown in samples.
