Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> East
> Fire alarm cable 1000 ft. #18 2/c shld. nplf red
Fire alarm cable 1000 ft. #18 2/c shld. nplf red
1000 feet of #18 AWG Non-Power Limited Shielded Fire Alarm Cable, Type NPLF.
This wire is for indoor use in fire/life safety systems, fire and alarm notification, smoke/heat detection, building control circuits and initiating circuit systems. Exceeds UL 1581 vertical tray flame test for cables installed as general purpose wiring. Rated 150 volts and -20 degrees Celsius to 90 degrees Celsius dry locations.
310 - Conductors for General Wiring
Construction: 18 AWG solid bare copper , PVC with Nylon insulation, color coded, cabled, aluminum/polyester foil tape plus tinned copper drain, red PVC jacket, surface printed.
This 2 conductor #18 solid wire has an insulation thickness of 15/5 (PVC/Nylon) Mils with the jacket thickness of PVC of 35 mils. The outside diameter is .236 inches and the net weight of 1000 feet of cable is 34 lbs. The capacitance is 39 picofarads per foot.
This product is new and can be not be returned unless defects are found in which case it will be replaced.
Be sure to add MWSCableSales to your favorites list!
