Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> East
> Fingerprint access control staff attendance time clock
Fingerprint access control staff attendance time clock
Fingerprint Access Control + Attendance Time Clock
Addavced biometric identifcation System
Access control - takes fingerprint or PIN or both. Direct connection to the door lock
Staff attendance management- automatic time tracking system
Save$$ - No more buddy punching!
Jetview F7 is a professional, complete biometric identification device for both access control and staff attendance time clock.
Developed one of the top companies in the world, the inside of F7 are a state-of-art, powerful Intel 32-bit embedded stand alone fingerprint module (ZEM100) and a CMOS sensor with automated exposure and intelligent compensation for image distortion. Its fingerprint identification algorithm has been used by more than 50-million machines installed around the world.
With the FAR (false acceptance rate) less than 0.001%, F7 takes both wet and dry fingers, scans a fingerprint at any angle, i.e. 0-360-deg. in less than 1 second, this in turn will make clocking in and out much faster for your employees and at the same time saving your company time and money.
In addition to the biometric fingerprint input, F7 has also a built-in keypad for password (PIN) input. This feature allows the user to use the unit in applications where the fingerprint collection/verification is not possible (i.e. none touch verification is required) or a combination of authentications is required.
By using the F7, the employees clock-in and clock-out is much more accurate than the traditional time clock, you can keep accurate employee attendance records and eliminate both inflated labor or buddy-punching in your company.
The state-of-art technology biometric identification technology now is affordable, it is time to add or replace your traditional time clock to enjoy the benefits of an automated time and attendance tracking system!
* High reliable biometric identification device
* Can be used for both access control and staff attendance time clock
* Huge-storage capacity that can meet most of small to medium size businesses
* Full network connectivity and LAN supported.
* Powerfull management software program included
* Varies reports formats supported by accounting program and statistical analysis
* Can be used as stand-alond unit for upto 3 months
* Small, compact size, easy to install
* 12V DC operation. Support direct connection to electrical door lock or via relay
* User sapacity: 500 fingerprint patterns
* Verification modet: 1:1 or 1:N (Fingerprint; Fingerprint+ID; Fingerprint+ID+PIN)
* Identification speed: <= 2 seconds
* FAR (fales acceptance rate): <=0.0001
* FRR (false rejection rate): <= 1%
* Network connectivity: YCP/IP' RS232/RS454
* Scan sensor: ZKsoftware CMOS sensor
* Output: Direct control for door lock or via relay (3A/12V DC)
* Alarm out: temper/dismentle alamr; illegal access alarm
* Management software program CD: access control and time clock insluded
* Operation power: 9-24V DC, 50mA (stand-by) or 400mA (operation)
* Operation temp: -0 +45 RH80% Max.
* Storage temp: -20 +65 RH80% Max.
F7 used as access control and in LAN
* 1 x Quick Installation Guide
* 1 x Rubber backing for mounting
Canada Distribution Center Address:
All items are new in the box. We do not sell used or refurbished products. If you are not 100% satisfied with your purchase, you can return it for a refund or exchange within 30 days of receipt of the purchase. All returns must obtain a valid RMA # before sending back to us.
