Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Woodwworking
> 2' fine grade stainless steel wool hydrogen generator
2' fine grade stainless steel wool hydrogen generator
Note the picture for this listing is only a stock photo not an actual picture of what you will receive. You will receive 2' of fine grade stainless steel wool
Fine grade AISI 434 stainless steel wool
Similar in fiber width to #0-00 Steel Wool
Avg. Fiber width 50 microns (0.05mm) / 0.002" (2 mils)
* Stainless steel wool is made from Alloy type AISI 434 stainless steel.
* The stainless steel wool is approximately 1/4" thick by 4" wide, and 2' long each piece
* Stainless steel wool products withstand temperatures in excess of 700 C, exhaust acids and high vibration.
* Furnace tests show that stainless steel wool will withstand sustained temperatures of 700 C and peak temperatures of 800 C for up to 10 minutes without damage or degradation.
* CHEMISTRY : C (Carbon) 0.12% max. ; Si (Silicon) 1.0% max. ; Mn (Manganese) 1.0% max. ; S (Sulfur) 0.03% max. ;P (Phosphorous) 0.04% max. ; Cr (Chromium) 16.0 - 18.0% max. ; Mo (Molybdenum) 1.25% max.; Fe (Iron) remainder
* This product is used in manufacturing bubbler and flame arrestors on hydrogen generators and also meets all of the physical demands for exhaust applications.
