Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> West
> Used
> Hp 8901A 150 khz to 1300 mhz modulation analyzer
Hp 8901A 150 khz to 1300 mhz modulation analyzer
Hewlett Packard 8901A 150 kHz to 1300 MHz Modulation Analyzer
The HP 8901A Modulation Analyzer is a complete measurement system for accurately characterizing signals in the 150 kHz to 1300 MHz frequency range.
It can make more than just a single form of measurement; it combines the capabilities of three separate instruments. The HP 8901A Modulation Analyzer has the capability of a frequency counter for measuring carrier frequency. It can measure RF peak power with typical measurement accuracy of 1.5 dB. It can also accurately measure modulation and recover the modulating signal. This allows the user to make those measurements most commonly needed to totally characterize a signal. The modulation analyzer can measure a signal s frequency, frequency drift, peak power level, AM, FM, or 0M, and AM and FM noise components. It recovers the modulating signal with very low added distortion for audio analysis.
Resolution: 10 Hz below 1000 MHz, 100 Hz above 1000 MHz
Automatic Input Level: -20 dBm to +30 dBm
Manual Input Level: Typically -60 dBm to +30 dBm
Frequency Rates: 20 Hz to 200 kHz
Frequency Deviations: to 400 kHz
Frequency Accuracy: 1% of reading 1 digit for rates 30 Hz to 100 kHz
Amplitude Rates: 20 Hz to 100 kHz
Amplitude Accuracy: 1% of reading 1 digit for rates 50 Hz to 50 kHz and depths >5%
Phase Deviations: to 400 radians
Phase Accuracy: 3% of reading 1 digit
Input Power Protection: >25 watts
Service and Operating Manuals are included
150 kHz to 1300 MHz Modulation Analyzer
