Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> West
> Ni pxi-8105 2.0 ghz dualcore pxi embedded controller 1G
Ni pxi-8105 2.0 ghz dualcore pxi embedded controller 1G
2.0 GHz Dual-Core PXI Embedded Controller
Intel Core Duo Processor T2500 (2.0 GHz dual core)
1024 MB (2 x 512 MB DIMM) dualchannel 667 MHz DDR2 RAM ,
4 GB (2 x 2 GB DIMMs) maximum
10/100/1000BASE-TX Ethernet
GPIB (IEEE 488) controller
IEEE 1284 ECP/EPP parallel port
Internal PXI trigger bus routing
OS and drivers already installed
Hard drive-based recovery image
The National Instruments PXI-8105 is a high-performance Intel Core Duo
T2500-based embedded controller for use in PXI and CompactPCI systems.
With its 2.0 GHz dual-core processor and dual-channel 667 MHz DDR2
memory, the NI PXI-8105 is ideal for applications requiring intensive
analysis or system development. A PXI-8105 embedded controller in a
PXI chassis offers a compact, high-performance PC platform for modular
instrumentation and data acquisition applications.
The PXI-8105 includes an Intel Core Duo T2500 dual-core processor.
Dual-core processors have two cores, or computing engines, located in
one physical package. With two cores, dual-core processors can
simultaneously execute two computing tasks. This feature is
advantageous in multitasking environments, such as Windows XP, where
multiple applications can run simultaneously. Two applications, such as
NI LabVIEW and Microsoft Excel, can each execute on a separate core
at the same time, which improves overall performance. Applications that
use multithreading can also take advantage of dual-core processors.
Multithreaded applications separate their tasks into individual threads.
A dual-core processor can simultaneously execute two of these threads.
Benchmarks in LabVIEW 8.0 indicate a performance improvement of up to
25 percent between the PXI-8105 and the NI PXI-8196 (2.0 GHz Intel
Pentium M 760) for single-threaded applications and up to 100 percent for
multithreaded applications. The SYSmark Overall Performance benchmark
for the PXI-8105 is 31 percent greater than that of the PXI-8196.
With state-of-the-art packaging, the PXI-8105 embedded controller
integrates the Intel Core Duo T2500 processor and all standard and
extended PC I/O ports into a single unit. By integrating many I/O ports
on the controller, all active slots in the PXI chassis remain available
for measurement modules. This rugged one-piece controller design
minimizes integration issues and eliminates the need for complex
cabling to daughter boards. The PXI-8105 also uses the Mobile Intel
The PXI-8105 includes high-performance peripheral I/O such as
10/100/1000BASE-TX (gigabit) Ethernet and four Hi-Speed USB ports
for connection to a keyboard, a mouse, a CD-ROM/DVD-ROM drive for
software installation, or other standard PC peripherals such as USB
speakers, printers, or memory sticks. Use the IEEE 1284 ECP/EPP parallel
port to connect to a wide variety of devices, including tape backup
drives, printers, and scanners. An RS232 port is available for connecting
to serial devices. Additionally, the PXI-8105 includes an integrated GPIB
(IEEE 488) controller, which provides control of external instrumentation,
saving additional cost and a slot.
The PXI-8105 includes an ExpressCard/34 slot. ExpressCard uses
the PCI Express and Hi-Speed USB serial interfaces to provide up to
to add a second gigabit Ethernet port to your system or additional
peripheral I/O such as external SATA hard drives, 802.11 wireless
LAN, IEEE 1394, Bluetooth, or various memory adapters.
Trigger Input/Output and Watchdog
The PXI-8105 includes an external SMB connection for use as a trigger
input, output, or watchdog timer. Use the external SMB to pass trigger
and timing signals into and out of the PXI trigger bus in your system.
The PXI-8105 features the integrated Intel Graphics Media Accelerator
950, which delivers intense, realistic 3D graphics with sharp images, fast
rendering, smooth motion, and high detail, without the need for an
additional video card or peripheral. This unique architecture provides
balanced memory usage between graphics and the system for optimal
performance. Additionally, the PXI-8105 includes a DVI-I video connector,
compatible with digital (DVI) and analog (VGA) monitors. A DVI-I to VGA
adapter is included with the controller for use with VGA monitors.
The PXI-8105 uses dual-channel 667 MHz DDR2 SDRAM. This feature
makes the controllers ideal for data-intensive applications requiring
significant analysis. The PXI-8105 has two SO-DIMM sockets for the
DDR2 SDRAM. 512 MB (1 x 512 MB DIMM) of RAM is standard with the
PXI-8105, with upgrade options to either 1, 2, 3, or 4 GB.
The PXI-8105 is available in two versions to address different
environmental conditions. The basic version has an operating
temperature of 5 to 50 C and a storage temperature of -40 to 65 C.
The extended-temperature version has an operating temperature of 0 to
55 C and a storage temperature of -40 to 85 C. The primary difference
is that the extended-temperature option uses a hard drive designed for
reliability in low- and high-temperature extremes. This extendedtemperature
hard drive has a capacity of 30 GB (minimum) versus 60 GB
(minimum) on the standard controller. Please see specifications for
The PXI-8105 comes with the following minimum set of software
Microsoft Windows XP Professional OS (contact National Instruments
ni.com/pxiadvisor for localized versions of Windows XP and
for other available operating systems)
Drivers for all built-in I/O ports (Table 1)
With NI Factory Installation Services (FIS) added to a PXI system order,
and drivers applicable for your system. For example, assume you order
a PXI system that includes LabVIEW and NI TestStand software, as well
as data acquisition modules, a digitizer, an arbitrary waveform generator,
but also fully configures the embedded controller with the appropriate
NI-DAQmx, NI-SCOPE, NI-FGEN, and NI-DMM drivers, as well as
LabVIEW and NI TestStand. Additionally, your embedded controller is
configured with a hard drive-based recovery image, so you can restore
combination of software configuration and recovery tools provides both a
productive and reliable development experience with your PXI system
out of the box. To configure a complete PXI system with FIS, contact
National Instruments or visit
National Instruments offers a USB-to-dual-PS/2 keyboard/mouse
adapter cable to connect a legacy PS/2 keyboard and mouse to a single
USB port on your embedded controller. Additionally, NI offers external
USB CD-ROM/DVD-ROM and USB floppy drives for use with your
embedded controller. Using the USB interfaces, connect these drives
to your embedded controller for easy software installation and upgrades.
Both are completely powered through the USB port, so no external power
connections are required. Additional USB peripherals, such as USB
speakers to add audio or USB memory sticks to add easily removable
memory, are widely available from PC peripheral manufacturers.
National Instruments offers numerous plug-in modules to add more
peripherals and ports to your PXI system. With the wide variety of
peripheral devices available, you can choose modules that add
communication with serial, IEEE 1394, and SCSI, in addition to numerous
others. Modules are also available for controlling other PXI or VXI/VME
ni.com/pxiadvisor to configure a system with additional
Retails NEW for this configuration for US $4,298
http:// /pdf/products/us/cat_pxi_8105.pdf
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202630
Includes controller, Original Software CD's
DVI-VGA adapter and brief Manual.
LOOK AT THE HI-RES PICTURES !!!!!
Please message,call or email if you want to "see it" working by remote control with
software from no installation necessary ,
just run application to remote control and brief verification of system.
This system is NEW and has only been turned on for very few hours.
Was original spare for production machines, but never used in production floor !
http:// /emcepeb/IMG_2049.JPG
http:// /emcepeb/IMG_2050.JPG
http:// /emcepeb/IMG_2051.JPG
http:// /emcepeb/IMG_2052.JPG
http:// /emcepeb/IMG_2053.JPG
http:// /emcepeb/IMG_2054.JPG
http:// /emcepeb/IMG_2055.JPG
http:// /emcepeb/IMG_2056.JPG
This is NEW, Old stock open box just to test and verify operation.
Sorry no international sales because of software restrictions on this item.
This is the last one we have, no DOA warranty, we have tested and is working now, can demonstrate!!
Your ffedback is important, please rate us, we stride to get top stars; let us know how to get all your stars.
