Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> West
> New
> Delta industrial 14" radial arm saw 5HP 3 phase
Delta industrial 14" radial arm saw 5HP 3 phase
I purchase this saw from the Washington International Airport when there project was finish. The saw is in very good condition, I never use the saw because I do not have 3 phase power.
The table top will need to be replace due to damage wood pieces. The saw is dismounted in 7 subassembly to make it easy to load in a truck, (730lbs)
Exclusive, "Turret Arm" construction permits the sawblade to rotate a full 360 above the work table. Gives full table capacity for cutting both right and left hand miters.
Unique, "Micro-Set" miter stops assure perfect right & left miter cuts for the life of the saw.
Lifetime, track rods feature glass-smooth hardened surfaces to minimize roller friction.
Up-front operating controls are conveniently located for safe, easy operation.
Six Positive, convenient table leveling jacks help sustain saw table-to-track arm parallelism for excellent cutting accuracy.
Table measures a full 44" x 36-1/2".
Convient fence lock knobs allows user to adjust and lock-in the desired fence position at front of machine.
Cutterhead return automatically pulls the cutterhead behind the fence so material can be quickly repositioned for the next cut.
Extra-long turret arm provides maximum outboard rip and crosscut.
Arm Saw with a 5 HP, 230/460V, 3 Phase TEFC motor with electro-mechanical blade
brakel; 14" combination blade, 14" blade guard with anti-kickback attachment;
retractable leaf guard; cutterhead return attachment; cuttinghead clamp knob; adjustable crosscut stop and steel legs.
MOTOR: 5 HP, 230/460 Volts, 3 Phase 60 hz, 3450 RPM, TEFC (totally enclosed, fan cooled)
24V Push-Button Station, Magnetic Starter, Transformer & 3-leg Overload Protection
BLADE: Diameter (supplied): 14" . Arbor: 1" (25 mm)
Maximum 90 depth of cut: 4" (102 mm)
Maximum 90 depth of cut (without leaf guard): 4-1/16" (117 mm)
Maximum 44 bevel depth of cut: 3/4" (19 mm)
Maximum 45 width of dado: 2" (50 mm)
Crosscut (1" depth of cut): 29" (737 mm)
Miter at 45 R & L (1" depth of cut): 22" (559 mm)
Maximum out rip: 41" (1041 mm)
Maximum width of dado (using standard motor side flange): 2" (51 mm)
Bevel: 0 , 30 , 45 , 60 and 90
Size: 44" x 36-1/2" (1118 x 927 mm)
