Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> South
> New
> Crain 16 ft. cr series leveling rod – tenths
Crain 16 ft. cr series leveling rod – tenths
FOR SALE: One (1) Crain 16 Ft. CR Series Leveling Rod Tenths
Specific Item Description (please review pictures):
* Leveling Rod has been moderately used; remaining in solid condition
* Leveling Rod shows some aesthetic surficial markings (as shown in pictures) & fading of numbers (as shown in pictures)
* Main Section (0' - 4') is securely taped at top (~2" crack at corner)
* Extends to full height with no problems
Crain s durable CR Series Leveling Rods are constructed of non-conductive fiberglass and are rectangular in shape with rounded back corners for a better grip. The scale width is graduated to fill the entire face of the rod and the CR s are equipped with stand-off ribs that protect the scale from wear.
* Rectangular shape of the leveling rod allows for laser sensor clamps to mount directly to the rod.
* Scales are glare-resistant and wear protected.
* Measuring scale allows user to read overall height measurements at eye-level, which is useful in making clearance and height measurements.
* CR Series leveling rods are water-proof and corrosion-resistant.
* Reliable, unbreakable buttons securely lock sections together.
* Easily removable locking mechanisms make disassembling for cleaning even easier.
* Detectors can attach anywhere along the Crain Rod, even at the top of a section.
* Unlike aluminum rods, the CR Series is non-conductive, and will not dent, gall or kink.
* The locking mechanism is tight and accurate, yet designed to resist jamming from sand and dirt.
CR Series Leveling Rods have a x 20 thread in the top section. CR Series rods have a leveling scale on one side and measuring scale on the other side. The measuring scale on the CR rods allows the user to read the overall height at eye level, and can be used to make clearance and height measurements. The CR Series will accept all lasers without a need for a separate bracket to mount the sensor. The sensor clamps directly to the rod without an adapter and there are no dead spots, even at the top of the sections.
