Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> South
> Elimia rotary phase converter 25HP 18.6KW cnc grade
Elimia rotary phase converter 25HP 18.6KW cnc grade
This is for a brand new 25 HP Elimia phase converter. Converts nominal 240 VAC single phase to 240 VAC three phase.
Heart of the converter is the heavy duty Reliance cast iron motor. This is a heavy duty ODP fan cooled motor with a service factor of 1.15. Insulation class is B. Nema frame size 284T. RPM 1740. Shaft has been removed for safety.
Everything is already included with the converter. There are no switches or parts to add. It includes everything except incoming and outgoing wiring. I have even included fuses for your 3 phase equipment wiring. Terminal connections are located inside the control panel for your wiring.
This converter is balanced to within 3% up to 30 Amps. This means that it can run sensitive voltage dependent equipment safely and consistantly.
Output phase voltage L1/L2/L3 within 3%.
Maximum rated output is 18.6 KW. Use your equipment ratings full load Amperage multiplied by your nominal 220/240 input voltage to determine. This unit will start a single load up to 13KW.
You will need to provide wiring from a 240 Volt double pole breaker to this unit. You will need to run #6 Copper or larger wire depending on your needs. The controls for the converter are 120 Volt. You will need to run a 120 Volt supply as well.
We are trying to make installation as easy as possible. Our converters include extra equipment that others don't. This saves you money in the long run. Motor starter is built in the control panel.
Please visit our website for more techinal info.
* Fused connections installed and ready for your 3-phase equipment wiring
