Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> Siemens sitrans fm transmag flowmeter 7ME5034-0AA11-2AA
Siemens sitrans fm transmag flowmeter 7ME5034-0AA11-2AA
Actual part# 7ME5034-0AA11-2AA0-Z+B11
Transmitter TRANSMAG 2 with alternating field
for connection to flow sensors
Remote Mount (mounting bracket required - see optional)
Rating plate inscription in English
SITRANS F M Transmag 2 is a pulsed alternating field magnetic
flowmeter where the magnetic field strength is much higher than
conventional DC pulsed magnetic flowmeters.
This makes it ideal for difficult applications like:
High concentrated paper stock > 3%
Mining slurries with magnetic particles.
Transmag 2 is used with the SITRANS F M 911/E sensor, available
with diameters of DN 65 and above.
Fast signal processing with 16-bit technology
Automatic recognition of sensor type and calibration data as
PROFIBUS PA (profile 3.0) / HART communication
Simple menu operation with two-line display
Internal simulator (for all input and output functions)
Monitoring of sensor using magnetizing current and reference
voltage as well as wet electrode function
Analog output and digital outputs for pulses, device status,
limits, flow direction, frequency output
Optional passive switch input for resetting the counter values
or for switching off the measuring equipment (PZR)
With pulsed alternating field for minimum conductivity of
0.1 S/cm depending on the sensor
The main applications of the SITRANS F M transmitter
Transmag 2 can be found in the following sectors:
The measuring procedure with pulsed alternating field patented
by Siemens AG is particularly suitable for media with a high solids
content, or magnetically conducting media.
The complete flowmeter consists of a flow sensor and an associated
transmitter from the SITRANS F M Transmag 2 for pulsed
alternating field. These are available as remote and compact
versions (SITRANS F M 911/E compact version with Transmag 2
only possible with nominal diameters DN 65 to DN 600 (2 " to
24"). They operate according to Faradays law of induction where
an electric voltage is induced in a conductor moving through a
The Transmag 2 is a microprocessor-based transmitter with a
build-in alphanumeric display in several languages. The transmitters
evaluate the signals from the associated electromagnetic
sensors and also fulfil the task of a power supply unit which provides
the magnet coils with a constant current.
The magnetic flux density in the sensor is additionally monitored
Further information on connection, mode of operation and installation
can be found in the data sheets for the sensors.
Operation of the Transmag 2 transmitter can be carried out using:
PC/laptop and SIMATIC PDM software via HART communication
PC/laptop and SIMATIC PDM software using PROFIBUS PA
