Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> North
> Lab measuring dispenser craft tool homeopathic workshop
Lab measuring dispenser craft tool homeopathic workshop
This is one of the most useful item I've seen in a long time. It holds 16oz of almost any liquid, you like to precisely measure time after time. It took me a few min. to understand how it really works, it's really easy to use, simply put any liquid you like to measure into the large plastic bottle then slide the movable cup at the top to the amount you want to dispense, then squeeze the soft bottle and the liquid will fill the cup at the top through two small holes in the top of the plastic tube at the top of the dispenser, the two holes are at right angles to the plastic tube so the liquid will not shoot up into the air, but will fill the cup from the sides of the plastic tube.
which will repeatedly dispense any set amount from O to l0 ml.
To adjust, slide dispensing cup on tube so that holes in tube are
in line with desired graduation. Then, squeeze bottle so that
reagent fills above the desired level. When pressure is relaxed,
excess reagent is drawn back into storage bottle.
(l) place bottle on level surface while filling cup;
(2) always put dust cover over cup when MEASURE-MATIC
(3) test and adjust the MEASURE-MATIC before using for
any exact amount. The graduations on the cup are intended as general guides NOT as precise graduations.
