Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> East
> Used
> Delfield sh-4 hot food table, four wells, portable, 60"
Delfield sh-4 hot food table, four wells, portable, 60"
Hot Food Table, Four Wells, Portable, 60" Length
Shelleysteel Hot Food Serving Counter, Electric, 4-pan size, stainless steel enclosed heated storage base, 5" swivel casters
* Exterior body is constructed of 18-gauge stainless steel side panels and
* 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded in place.
* All body cutouts are reinforced with 14-gauge galvanized channel supports.
* Exterior top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit.
* Top is fabricated with square exterior corners. Top has two to six electrically heated, recessed, die-stamped stainless steel hot food warmers.
* Each warmer accommodates one 12.75" x 20.7" x 6" pan.
* Heated food warmers are constructed of die-stamped stainless steel. Heated
* food warmers are insulated on bottom.
* Each heated food warmer is individually equipped with a heated element
* rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase
* service and wired to an adjustable control switch and indicator light in the control panel.
* Heated food warmers are interwired to a maximum 10 foot long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service.
* Casters: Unit is mounted on 5" diameter swivel casters with non-marking polyolefin tires and plate brakes. Overall height of caster assembly
* All SH models have a one door heated compartment. Compartment is constructed of 18-gauge stainless steel, is insulated with a minimum of 2" insulation and is provided with removable 16-gauge pan slides.
* Manufacturer: Delfield Company
