Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> East
> New
> Gallmeyer & livingston universal od cylindrical grinder
Gallmeyer & livingston universal od cylindrical grinder
12 x 24 Grand Rapids Universal OD Grinder
27" Swing Length Between Right and Left Hand Tailstocks
24 Swing Length Between Work Head and Tailstock
16 Longitudinal Table Movement
8 Vertical Movement of Spindle
Centerline of Spindle to Top of Table, Maximum 10-1/2"
Grinding Spindle Tilts Both Directions 10 Degrees
Table Swivels in Either Direction 90
Graduations on the End of Table for Taper Per Foot 3"
Graduations on Swivel Plate 360
Table Traverse Per Revolution of Hand Wheel 1/2", 3 1/2", 8 1/4"
Work Head Speeds 265 and 370 RPM
Work Head Swivels (R-L) & Tilts up to 90 Degrees
Vertical Feed Per Graduation 001"
Cross Feed Per Graduation 001"
Motor For Spindle Drive 3/4 HP, 1750 RPM
#5 MT on Right Side of Spindle
#12 Brown & Sharp on Left Side of Spindle
Spring Loaded Tail Stock Spindle
2 Step V Belt Drive to Spindle
Wheel Can be mounted on Either side of Spindle Box
Mechanical Power Feed to Table
CONDITION: From Service - Inspect Under Power!!!!
Dimensions: 66 R-L x 53 F-B x 65 Tall Weight app. 3000 Lbs
