Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> East
> New
> Bearcat BCT15X scanner and so much more
Bearcat BCT15X scanner and so much more
This is some information I found on the web about this. I don't know anything about these scanners but I will do my best to help with questions.
THIS UNIT IS NEW AND NEVER USED!
* Sites: 1000 maximum, 256 maximum per system
* Scan Rate: 100 channels per second (conventional mode)
* System Quick Key range: 0-99
* Group Quick Key range: 0-9
* Preprogrammed Service Search Bands: 12
* Band Scope Range: 0.2 to 500 MHz
* Band Scope Steps: 5 kHz to 100 kHz
* TrunkTracker III - tracks the following trunked systems:
* Motorola Type II 800, 900, UHF, VHF (including rebanded 800 MHz systems)
* EDACS Wide (standard), Narrow, SCAT (including systems that use an EDACS System Key)
* BearTracker warning system
* Location-Based scanning automatically selects programmed systems based on your location when connected to a compatible GPS receiver.
* Temporary lockout automatically unlocks channels when you cycle power.
* Startup Configurations let you automatically lock out or unlock systems on power up to quickly configure the scanner for a different area or application.
* Alert Plus mode - silences the scanner except for channels that have assigned alerts.
* Channel Number Tagging - lets you quickly select a channel.
* State-by-State Preprogrammed Channels - let you easily keep up with activity on local police, Department of Transportation, and Highway Patrol frequencies when you travel, without having to program any channels.
* Close Call, with Close Call Do Not Disturb, Close Call Priority (or Primary), and Close Call Temporary Store.
* Fire Tone-Out Search - determines the tones received for easy tone-out programming.
* Motorola Control Channel Only trunking
* Frequency/ID AutoStore - automatically store frequencies from a service or limit search into a conventional system or store talk group IDs into a trunked system
* 16 character text tagging for each system, site, group, channel, talkgroup, search range, GPS location, tone-out, and SAME group
* Compatible with BC-RH96 Remote Head
* Service Search - lets you select from Public Safety, News, HAM Radio, Marine, Railroad, Air, Citizens Band Radio, FRS/GMRS, Racing, FM Broadcast, Military Air, and Special (Itinerant)
* Custom Search - lets you program up to 10 search ranges
* 500 (250 Temporary + 250 Permanent) Search Lockouts
* Priority Scan with Priority Plus
* Trunking Activity Indicators
* Negative Channel Dropout Delay (Forced Resume
* Adjustable Hold (scan duration 0-255 sec) per system, custom or service search
* Strong signal attenuation
* Independent Alert Tone Volume - lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
* Broadcast signal ignore while searching (TV and radio station frequencies, pagers, etc)
* Quick Recall - quickly navigates to a specific Channel by choosing the System, Group, and Channel.
* DIN-E and ISO Vehicle Mountable (DIN-E sleeve not included optional)
* Record Out - you can connect an output jack to a VOX controlled recorder or PC sound input to record the received audio.
* PC Programming and Control
* Power requirements: 11.0V to 16.6V DC
