Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Welders
> Controller bosch LTC5133 LTC9409 pan tilt cctv camera
Controller bosch LTC5133 LTC9409 pan tilt cctv camera
A TESTED BOSCH PHILIPS MODEL LTC5133/60 CONTROLLER
WORKS WITH MODEL LTC9409/60 PAN/TILT AND Zoom Lenses
Lot mileage. Works like new. Guarantied.
Good Stuff: This is an operating unit. I tested it with a pan tilt unit and it's smooth.
Cosmetic condition. On a scale of poor/fair/good/excellent/new this one falls in the
good range overall. Just a few scratches and nicks. It's pretty.
Guaranty: Return it for a refund for any reason within two weeks after arrival. Refunds whole or
Zoom, focus, iris and lens controls
The LTC 5133 Series combine the functions of pan/tilt
control and motorized zoom lens control in one complete
unit. Models are available to control 24 VAC, 60 Hz or
120 VAC, 60 Hz pan/tilts, scanners, and 6 VDC or 12 VDC
An easily accessible front panel eight-position joystick
provides pan/tilt movement - up, down, left, right, or
simultaneous combinations of pan/tilt functions. An autopan
feature is available and is activated by pressing the
AUTOPAN switch, located on the front panel.
Auto-pan may be deactivated by either pressing the
AUTOPAN switch or by operating the joystick left or right.
The LTC 5133 Series offer two methods of auto-pan control
- current sensing or hardware controlled. Each is switchselectable
from inside the unit. Selection is based upon the
electronics of the pan/tilt or scanner being controlled. Lens
control is handled by pushbutton rocker switches on the
front panel which control zoom, focus, iris, and lens speed.
The LTC 5133 Series and LTC 5134 Series are supplied as
desktop units, but can be rack mounted using the
any questions. ****@yahoo.com
