Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> West
> Used
> Suburban tool co v-237-j-S1 grind vise xlnt toolmaker
Suburban tool co v-237-j-S1 grind vise xlnt toolmaker
THIS IS A USED SUBURBAN TOOL CO. V-237-J-S1 SINE SERIES 1 SCREWLLESS GRINDING VISE WITH STEPPED JAWS AND V-GROOVES AS SHOWN. VISE IS BELIEVED TO BE ALL ORIGINAL MAYBE 45 DEGREE CHAMFERS ADDED BY TOOLMAKER BUT DOES NOT APPEAR TO HAVE BEEN GROUND OTHERWISE AND IT IS IN VERY NICE CONDITION. BASE IS CLEARLY MARKED SURBAN TOOL CO.WE CHECKED THE STEPPED AJWS AND THEY WERE BOTH PARALLEL TO .0001" AND SIZED WITH EACH OTHER TO .0001". BASE INDICATES TO .0001" AND IS ACTUALLY BETTER THAN ADVERTISED NEW. VISE DOES HAVE STAINING EVEN THOUGH IT WAS STORED IN A GERSTNER BOX AND OR BASE SOON TO BE LISTED HERE IN OUR STORE. CURRENT LIST FOR A BRAND NEW VISE FROM MSC IS $695.00!!!!! VISE MEASURES 7-1/2" X 3" WIDE X 2-5/8" TALL AND IS A SINE SERIES VISE SO IT BOLTS DIRECTLY TO OTHER SERIES 1 TOOLS WITH LITTLE OR NO INDICATIONG NEEDED!!!! THIS IS A VERY HANDY FEATURE!!! WE HAVE SINE PLATES AND ANGLE PLATES LSITED IN OUR STORE THAT WILL BOLT TO THIS ACCORDING TO MASTER-CATALOG FROM SUBURBAN TOOL CO.
* Square & parallel within 0.0002" & 0.0003".
* Made from steel, hardened to Rc 58-62.
* Angled center channel provides extra jaw capacity.
* Moveable jaw pulls into base at 45 to 60 to insure maximum holding power and hold down force, eliminating tilting and lifting.
