Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> West
> S-parameter test set HP8748A / HP8754A / HP8672A-K22
S-parameter test set HP8748A / HP8754A / HP8672A-K22
HP 8672A-K22 Frequency Extension Unit
Three piece lot recently removed, working, from test site.
HP 8754A Network Analyzer 4Mhz to 2.6GHz Compare at $2,400.00
* Integrated source, receiver, and display
* Three inputs, two measurement channels
* Option H26 4-2600MHz installed
HP 8754A is a complete stimulus/response test system which combines a 4-1300 MHz swept source (4 - 2600 MHz with option H26), three-input narrowband, tuned receiver, and both rectilinear and polar displays in a compact package. The convenient built-in source incorporates digital display of the start or center frequency, the ability to sweep all or any portion of the 4-1300 range, and crystal markers at 1, 10, or 50 MHz intervals to enable accurate frequency calibration and measurement.
The receiver provides 80 dB dynamic range in two independent measurement channels to allow simultaneous measurement of any two transmission or reflection parameters using a single test setup. Measurements of absolute power, magnitude ratio, phase angle, and reflection coefficient (or return loss) are displayed on the fully calibrated CRT with resolutions up to 0.25 dB and 2.5 degrees per major division. With these features the HP 8754A offers a high level of operating convenience and technical performance to swept magnitude and phase measurements in laboratory, production, and field testing applications.
HP 8748A S-Parameter Test Set 4 - 1300 MHz Compare at $700.00
The 8748A S-Parameter Test Set is a 50 ohm set with a frequency range of 4 to 1300MHz.
* Attenuator Range: 0 to 70 dB in 10dB steps
* Max Input: +20 dBm APC-7 connectors
HP8672A-K22 Frequency Extension Unit 10MHz to 18 GHz
10 MHZ to 18 GHZ. AM, FM and pulse modulation with low spurious and phase noise.
