Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> West
> New
> Greenheck exhaust fan model# cube-300HP-50-g very large
Greenheck exhaust fan model# cube-300HP-50-g very large
This is a large extractor fan for use in restaurants or for industrial use. It measures about 48" in diameter and about 42 inches high. I was not able to weigh it, but my guess is that it weighs about two or three hundred pounds. It appears to have never been hooked up as the wires from the motor do not show signs of being connected and the belt pullies do not have any paint removed where the fan belt contacts the pullies. This is a Greenheck model # cube-300hp-50-G. Serial # 01C18932. Mark KEF-1. I could not read the motor plate very good because it is way down in there but it appears that the horsepower is 5/3 (I think that means 5). The RPM looks like 1745/1465. It has 208 volts written on there also.
I inherited this fan when I purchased a warehouse a few months ago, since the contract stated that what ever was left in there became my property. That is why I have it, but don't know alot about it except that it appears not used. I have heard that it has a un used value of about $4000, but you may want to do some of your own research to verify that.
